GEN 2 Rubbing on 37s w/ RPG 1.5 collars. Tips on cutting fender flares

[Jake17]

Stuff needs to get ground down to fit the tire at full turn.

 

[dinoone]

3" RPG Solves the problem and the rake is only noticeable if you tell someone.

 

[waldoaz]

Just cut it all off. Don't be scared. Most guys (baja guys) running 37" and higher cut it all the way to the wall. LOL. Im running 38" with just eibach springs and diberti fenders. I will be able to do 40" soon as i upgrade to 3.0 foxes and minor lift.

God forbid you lift the truck because you will get hammered on this forum. LOL. This forum is for stock setups mostly. You will not get any help here for actual suspension mods.

If your good with hack saw it is easy. These trucks are easy to cut since they are all aluminum. Just grind and san down the area and make sure to paint the area with some paint to avoid rust or have your body shop weld it shut again after you cut.

 

[MOLONxLABE]

Just cut it all off. Don't be scared. Most guys (baja guys) running 37" and higher cut it all the way to the wall. LOL. Im running 38" with just eibach springs and diberti fenders. I will be able to do 40" soon as i upgrade to 3.0 foxes and minor lift.

God forbid you lift the truck because you will get hammered on this forum. LOL. This forum is for stock setups mostly. You will not get any help here for actual suspension mods.

If your good with hack saw it is easy. These trucks are easy to cut since they are all aluminum. Just grind and san down the area and make sure to paint the area with some paint to avoid rust or have your body shop weld it shut again after you cut.

lol

Your perception of why lifted raptors get hammered on this forum is ******.

My "stock setup":

 

[waldoaz]

lol

Your perception of why lifted raptors get hammered on this forum is ******.

My "stock setup":

LOL. Well your one in a thousand members. Just giving this guy advice. thats what forums are suppose to be. This forum just bashes on members for any little mod. Just helping out like a forum is suppose to be.

Cheers to you and would like to see pics of your beast inside an out.

 

[dude1782]

LOL. Well your one in a thousand members. Just giving this guy advice. thats what forums are suppose to be. This forum just bashes on members for any little mod. Just helping out like a forum is suppose to be.



Cheers to you and would like to see pics of your beast inside an out.

People get bashed for stuff like kfc bucket wheels, lifts, spacers, and enormous fenders on stock suspension. Superficial mods, especially ones that take away from the performance of a purpose built truck, are not well received around here.



Sent from my 2017 Raptor using Tapatalk

 

[Stickman89]

37’s fox shocks and deaver +3’s Very Light trimming clear under full compression. I have yet to see a set of fenders that fit good





Sent from my iPhone using Tapatalk

 

[dinoone]

Amen!.........

Just cut it all off. Don't be scared. Most guys (baja guys) running 37" and higher cut it all the way to the wall. LOL. Im running 38" with just eibach springs and diberti fenders. I will be able to do 40" soon as i upgrade to 3.0 foxes and minor lift.

God forbid you lift the truck because you will get hammered on this forum. LOL. This forum is for stock setups mostly. You will not get any help here for actual suspension mods.

If your good with hack saw it is easy. These trucks are easy to cut since they are all aluminum. Just grind and san down the area and make sure to paint the area with some paint to avoid rust or have your body shop weld it shut again after you cut.

 

[iceman7273]

37’s fox shocks and deaver +3’s Very Light trimming clear under full compression. I have yet to see a set of fenders that fit good





Sent from my iPhone using Tapatalk

What backspacing are you running?

 

[Truckzor]

God forbid you lift the truck because you will get hammered on this forum. LOL. This forum is for stock setups mostly. You will not get any help here for actual suspension mods.

Wow. Talk about ignorance.

What backspacing are you running?

Pretty sure those are Icon wheels, which would be 5" backspace or 6mm offset.