Rubber Body Panel Plugs

[Chzhead]

I've tried to search here and have not found anything. Also cannot find anything on google for the Gen 1's. I changed my oil the other day and noticed my plugs......well "tape"......that covers the back side of the body panels holes are starting to come off (1 is already gone). I took a few pics (don't mind the bit of Utah I still have with me). Most are peeling really bad and REALLY don't want to keep these exposed going into winter.


I'm looking to see if I can find rubber plugs to replace these. I know my 2002 F150 had them but can't find anything for my 2013. Looking for something similar to this
Rubber Body Plug & Grommet Kit

Anyone come across anything like these??

 

[Irregular F150]

No, but id like to find some myself.

 

[roush_14]

I would be as well. I put new tape on before last winter but would rather have the caps, the older f150s had them but I was never able to locate a part number.

 

[Gryphon313]

Like these? Sorry. Not Raptor specific.

McMaster-Carr

McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.

www.mcmaster.com

Below are Ford parts. Not sure what size you need, but these are for the floor pan sized holes. 18mm.

https://parts.ford.com/shop/en/us/engine/other-engine-parts/plug-6307873-1?pdp=y#/sectionId:4065092

 

[wheelman55]

Try here: https://www.rubbertherightway.com/body-plugs.htm

 

[Chzhead]

Like these? Sorry. Not Raptor specific.

McMaster-Carr

McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.

www.mcmaster.com

Below are Ford parts. Not sure what size you need, but these are for the floor pan sized holes. 18mm.

https://parts.ford.com/shop/en/us/engine/other-engine-parts/plug-6307873-1?pdp=y#/sectionId:4065092

Kinda but they are more oblong

 

[Chzhead]

Try here: https://www.rubbertherightway.com/body-plugs.htm

THAT looks promising......may have to do some trial and error with these. See what I can come up with.

Thanks!

 

[Gryphon313]

Kinda but they are more oblong

These are the oval style.

https://parts.ford.com/shop/en/us/plug-6270213-1?pdp=y#/collapseRelated3

 

[TAC71]

I first tried ordering some different types of plastic and rubber plugs to replace the tape. None of them fit great. I contemplated using gorilla tape but wasn't fond of the idea. I really wanted a cap so it could be easily removed for the spray oil I use for rust prevention.
Where I work we have several wrecked / parts trucks. All Fords about 2010 or so vintage , F150 250 and 350. On the floor of the cab there is 4 plugs that fit perfectly in the G1 Raptor. It obviously takes a few trucks to get what you need.

 

[Chzhead]

I first tried ordering some different types of plastic and rubber plugs to replace the tape. None of them fit great. I contemplated using gorilla tape but wasn't fond of the idea. I really wanted a cap so it could be easily removed for the spray oil I use for rust prevention.
Where I work we have several wrecked / parts trucks. All Fords about 2010 or so vintage , F150 250 and 350. On the floor of the cab there is 4 plugs that fit perfectly in the G1 Raptor. It obviously takes a few trucks to get what you need.

Ooohh....I think your on to it. I think these look about right???

https://parts.ford.com/shop/en/us/hardware-and-fasteners/hardware-and-fasteners-71564-2/plug-blanking-6522193-1?pdp=y

https://parts.ford.com/shop/en/us/transmission/powertrain-engine-parts/plug-blanking-6266565-1?pdp=y

I'll have to swing by my dealer and see if these work