Roush serpentine belt

[2baddogs]

Thanks for the info guys. I found the K061251 on amazon so i ordered it. Funny enough before this i decided to try and go the "official" route and simply email Roush and ask them. They actually emailed me back and told me the belt size is 3200mm. So there you go straight from the company's mouth..er... finger tips.

You guys would be suprised how much i was in shock and forgot what real customer service is from living here too long... sigh.

No luck with the K061251, the packaging shows 3192mm and it is about 1/4" too small to get on the last pulley. I tried several different methods/pullies with no luck. Stock length belt went back on without a problem. I do believe 3200MM is the correct length, the 8mm diff is equal to about 1/3 of an inch.

Installing on a factory 2014 Roush.



Pick of original part# on "factory" belt.

 

[MTF]

That belt will fit a stage 2

You can try and get a smaller diameter idler if you're stage 1

 

[2baddogs]

I beleive all 2014's were stage 2 (590 hp). So you got that belt to fit? Any tips on how? What pulley did you put on last?

 

[MTF]

I not sure about that, stage 2 required extra warranty.

You're going to have wait till the Roush guys chime in that use the belt.

 

[2baddogs]

From RoushPerformance.com

2013 / 2014 ROUSH Off-Road Raptor

OVERVIEW

ROUSH® Performance returns to the truck market with the ROUSH OFF-ROAD F-150 SVT Raptor. The 2013 / 2014 ROUSH OFF-ROAD Raptor features the new Phase 2 Supercharger Kit for the 6.2L engine that produces a whopping 590HP and 590lb-ft of torque. That’s a gain of 179hp and 156 lb-ft of torque over the factory base performance!

 

[MTF]

Yes, that's what that page says for the off road package that they started offering, do you have that package?
It's the most expensive Raptor Roush offers.
You get some badging and other extras.

Otherwise the their kits come Stage 1 and 2 for 2011-2014 non-off road.

 

[Canuck714]

Anyone get the KO61251 belt to fit a 2014 Roush Raptor??
Curious if I can grab a spare belt.
Mine is also the 3200 Roush belt

 

[Canuck714]

reserecting the belt thread

Has anyone ordered the belt using this part #?? I went online and googled it and nothing comes up, O'Rielly's didnt list it and neither did Advace Auto Parts.

Thanks

Got the info on that oreillys belt for you. Part# K061251 gates century series micro v belt. 6 rib belt .807 inches wide and 125.6 inches long. I have not personally used this belt, it's jut what I bought for a spare. There's another thread on here where a guy has been using it for 6 months + and has not had any problems with it

 

[MTF]

https://www.amazon.com/dp/B00498FY4Q/?tag=fordraptorforum-20

When you go to these part stores you have to make sure your vehicle is not remembered, because the belt does not fit your vehicle. So they won't display it.

Here's the O'Reilly
http://www.oreillyauto.com/site/c/d....oap?ck=Search_N2495_-1_-1&pt=N2495&ppt=C2448

 

[svt_reid]

Has anyone ordered the belt using this part #?? I went online and googled it and nothing comes up, O'Rielly's didnt list it and neither did Advace Auto Parts.

Thanks

I believe I got the part number off of another thread on here. Idk it worked for me when I went to oreillys, but that was a little while back. They didn't have it in stock but got it there for me within 3 days. Maybe someone can chime in. Who knows they may have discontinued