Rigid 40 quit working

[ironside]

I have a rigid e series 40" behind the grill that has worked flawlessly for over a year. I bought it of treypal last summer. Recently I was on the ARDD and it quit working. Doing some tests I'm getting power to the battery side of the connector. But the bar is not lighting up I don't really have a tools to check for how much amps I'm getting to the connector. So my question is would this be something cover by warranty as I was not the original purchaser, or am I out of luck.
Thanks

 

[Huck]

Check the ground


Sent from my iPhone using Tapatalk

 

[ironside]

Check the ground


Sent from my iPhone using Tapatalk

I've got all of my lights tied to a single ground and they all still work. I can check that tomorrow after work

 

[Madcowranch]

Drag it behind your truck by a chain like they do in that video and see if that helps.

 

[Pynenut]

It's covered. Email them then ship it out. Mine quit after 2 years and they fixed it up. Good as new.


Sent from my iPad using Tapatalk

 

[Tmesic]

I have a rigid on my sand car and half stopped working . They solder each board to the next maybe it is where the power wire enters the first board. It was pretty simple to work on. If you're handy maybe just peek inside. A lot of Allen screws but pretty simple. Jmho . Tim

 

[seigemeister11]

check your fuse in the hot lead...my vision x quit working and turned out the fuse blew in there. It was only a 15amp when I needed a 25amp fuse.


Sent from my iPhone using Tapatalk

 

[ironside]

check your fuse in the hot lead...my vision x quit working and turned out the fuse blew in there. It was only a 15amp when I needed a 25amp fuse.


Sent from my iPhone using Tapatalk

Mines tied into one of the upfitter switches and that fuse is good

 

[lexmotorsports goodguy]

contact Rigid, give them a chance to offer some troubleshooting suggestions, or warranty options

 

[ironside]

contact Rigid, give them a chance to offer some troubleshooting suggestions, or warranty options

I'm gonna do that I've been up working in the oilfield so decided to wait til I had time off to call and get it taken care of