Recommended radiator?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

BlueHound

Member
Joined
Dec 12, 2023
Posts
26
Reaction score
48
Location
Calgary, AB
For the hose clamp tool I’d recommend the Astro. It’s more expensive than the cheapies (but wayyy less than Snap on). When you need it (like for the brutal lower rad hose on these), you will be glad you spent a bit more!

 

Stormtrooper

Raptor R
Supporting Member
Joined
Sep 22, 2021
Posts
665
Reaction score
1,433
Location
Huntington Beach, CA
I didnt see a ford specific on CBR site…?
I’ve only ran a CBR on a Gen1. RPG sells it. CBR will make a custom radiator for a Gen2 or Gen3, however I have not ran one in those year Raptors. Keep in mind, you will still have to trim the fan shroud for the Gen1.

 

BenBB

FRF Supporting Member
Supporting Member
Joined
Apr 21, 2016
Posts
1,801
Reaction score
2,433
Location
Lots of different places
I’ve only ran a CBR on a Gen1. RPG sells it. CBR will make a custom radiator for a Gen2 or Gen3, however I have not ran one in those year Raptors. Keep in mind, you will still have to trim the fan shroud for the Gen1.

Definitely a good looking piece but...I can almost get another 2 Full Race spares for that much (and my labor is free heh). Or a massive transmission cooler (I'm good with the Ford Saudi cooler there). Not knocking CBR at all and I did seriously consider them but couldn't justify that price since I'm not like competing in SCORE or NORRA.
 

Stormtrooper

Raptor R
Supporting Member
Joined
Sep 22, 2021
Posts
665
Reaction score
1,433
Location
Huntington Beach, CA
Definitely a good looking piece but...I can almost get another 2 Full Race spares for that much (and my labor is free heh). Or a massive transmission cooler (I'm good with the Ford Saudi cooler there). Not knocking CBR at all and I did seriously consider them but couldn't justify that price since I'm not like competing in SCORE or NORRA.
I ran the full race 20 Row transmission cooler in conjunction with the CBR radiator and also ran the Aftco heat exchanger with two 10” SPAWL fans for the supercharger in my last Gen1. For cooling purposes, I found that this was the best set up after running all the other radiators (with the exception of the Ron Davis) and heat exchangers on the market. The only radiator that would be superior to the CBR would be the Ron Davis.

IMG_4860.jpeg
IMG_4862.jpeg
IMG_4864.jpeg
 
OP
OP
C

Cody Templeton

FRF Addict
Joined
Oct 29, 2020
Posts
1,392
Reaction score
1,093
Location
Des Moines, IA
I ran the full race 20 Row transmission cooler in conjunction with the CBR radiator and also ran the Aftco heat exchanger with two 10” SPAWL fans for the supercharger in my last Gen1. For cooling purposes, I found that this was the best set up after running all the other radiators (with the exception of the Ron Davis) and heat exchangers on the market. The only radiator that would be superior to the CBR would be the Ron Davis.

View attachment 464422
View attachment 464424
View attachment 464423

What about running remote mount somewhere else for some of that stuff?
 

jimmyjamm

Full Access Member
Joined
Dec 12, 2019
Posts
256
Reaction score
232
Location
Bend, OR
Full Race, I have had a FR radiator in my gen 2 now for 2.5 years and it has been great. As for trans cooler, I kept stock, as even towing I don't see anything beyond middle of the road normal temps
B
 
Top