Rebuilding a 6.2 Engine

[billyhondajet]

Wasn't easy, but I found it for you. Cam Caps:

View attachment 440555

Phasers:

View attachment 440556

Hope it helps. Good luck!

Where did you get all of these tech docs? Is it a manual you can buy?

 

[PD1744]

Where did you get all of these tech docs? Is it a manual you can buy?

Um... I found a copy. Somewhere online. Likely pirated and by clicking sketchy links. Proceed at your own risk.

 

[Chewie]

Great thread and info

 

[MackFord]

So, what finally happened to the engine?

 

[PD1744]

So, what finally happened to the engine?

Still sitting in the shop waiting on this one to blow up. Over 241k and she hasn't given up yet. I don't have the time to do a 'just because' engine swap. So it's just rainy day insurance at this point.

 

[MackFord]

Nice to have a spare!

 

[shoracer]

I know his was not installed yet, but I run a 7.3L set up in my 6.2L. It has so much stupid torque I had a hard time getting into boost. It is an easy build to do. Just takes some custom pistons. If anyone is interested in the same I can get you in touch with the gentleman who came up with the custom pistons. On aside note you will find out really quickly if our overdrive drum has issues. Also the 6R80 is not the hard to rebuild, must make sure you get the calipers and dial indicators needed.

 

[Darthyota]

I know his was not installed yet, but I run a 7.3L set up in my 6.2L. It has so much stupid torque I had a hard time getting into boost. It is an easy build to do. Just takes some custom pistons. If anyone is interested in the same I can get you in touch with the gentleman who came up with the custom pistons. On aside note you will find out really quickly if our overdrive drum has issues. Also the 6R80 is not the hard to rebuild, must make sure you get the calipers and dial indicators needed.

So is yours still gas or did you diesel swap it?

 

[shoracer]

It is still gas 6.2L block with only .020 over.