Rappy Graphics Topography B Pillars

[hopkintj]

Hi All,

Looking at these Rappy Graphics B Pillar overlays for my Iconic Silver 37PP to tie in with the rest of the OEM topography. I did a search of threads but could t find any pictures in the forum of these graphics specifically - just lots of other previous Rappy Graphic versions.

GEN 3 BLACKOUT Edition B-PILLARS

Gloss Printed Topographic pattern B-Pillar Overlays THESE WILL ONLY FIT THE GEN 3 RAPTORS

rappygraphics.com

Does anyone have these mounted and could show me what they look like on?

 

[oliver1539]

Hi All,

Looking at these Rappy Graphics B Pillar overlays for my Iconic Silver 37PP to tie in with the rest of the OEM topography. I did a search of threads but could t find any pictures in the forum of these graphics specifically - just lots of other previous Rappy Graphic versions.

GEN 3 BLACKOUT Edition B-PILLARS

Gloss Printed Topographic pattern B-Pillar Overlays THESE WILL ONLY FIT THE GEN 3 RAPTORS

rappygraphics.com

Does anyone have these mounted and could show me what they look like on?

Did you buy these? I’m looking at doing the same since mine have swirl marks on them.
I think they would look good to match the rest of the 37pp graphics.

 

[8250_RPM]

I was going to go this route and ultimately didn’t since I removed all graphics. They look nice otherwise. I ended up buying a set of overlays from another co. to hide the swirl marks which were irking me.

 

[rog7254]

Did you buy these? I’m looking at doing the same since mine have swirl marks on them.
I think they would look good to match the rest of the 37pp graphics.

 

[cfmistry]

Is the bottom bubbling / peeling? I have that problem with mine that are wrapped in PPF.

 

[aandrews109]

I’ve purchased several items from Rocky Mountain Graphics and have been well satisfied. Hood Cowl, Front Grill and Tailgate letters. Don’t know anything about Rappy or their products so can’t speak to the particular item, but do think Rocky Mountain has something similar.

 

[wazatataza]

Hi All,

Looking at these Rappy Graphics B Pillar overlays for my Iconic Silver 37PP to tie in with the rest of the OEM topography. I did a search of threads but could t find any pictures in the forum of these graphics specifically - just lots of other previous Rappy Graphic versions.

GEN 3 BLACKOUT Edition B-PILLARS

Gloss Printed Topographic pattern B-Pillar Overlays THESE WILL ONLY FIT THE GEN 3 RAPTORS

rappygraphics.com

Does anyone have these mounted and could show me what they look like on?

I’m 99% sure these will fit a gen 2.

Can anyone verify sizing?

 

[rog7254]

Is the bottom bubbling / peeling? I have that problem with mine that are wrapped in PPF.

Not peeling at all, also you can use torque bit 20 to loosen the bottome plastic of the window and put the PPF all the way down and tightend after.

 

[cfmistry]

Welp, that was a really fast way to waste $99. I tried dry application, wet application, but neither turned out any good. Definitely blaming myself and not willing to retry.

Putco pillars anyone?

 

[GCATX]

Did you buy these? I’m looking at doing the same since mine have swirl marks on them.
I think they would look good to match the rest of the 37pp graphics.

Rubbing compound will clean them up in about 5 minutes.