Purple cranium rock guards

[Blind1]

I wonder if you can get these to fit over an aftermarket/high capacity cover.

I believe Wiz has done that. It's has been a while since I read his build, but I do remember him installing a big aftermarket axle cover and installing a *** on it as well. (or maybe my memory is seeing things)

 

[Java]

Wiz doing something to excess...shocking

 

[Nick@Apollo-Optics]

I'll have to look into this.

 

[FvilleRaptor]

So can a full spider be installed over the stock 2013 cover without removing the cover. I don't want my diff to open up if I install this.

 

[J DAMAGE]

How are these installed without removing the differential cover like it's advertised?




Sent from my SAMSUNG-SGH-I337 using Tapatalk

The factory cover is siliconed on real good, you remove the bolts its not going anywear, just changed my cover and it was a bitch getting the factory cover off.

So can a full spider be installed over the stock 2013 cover without removing the cover. I don't want my diff to open up if I install this.

Thats what the spider is for, placement over your cover for added protection.

 

[skyl3r]

yall are so much trouble. I HAVE to get one of these. Texting Jason and watching video now. lol.

 

[J DAMAGE]

Some of you may also like this cover, I used it on my race cares, and I can say it is pretty much bullit proof, now one is on my raptor.

Ford Girdles, Ford Lightning 9.75" Rear End Girdle, TA_1804 | TAPerformance.com

 

[mudblood]

Any torque requirements for the diff bolts? This is a very inexpensive modification I am darn interested in.

 

[Vash]

I think the torque on both front and rear diff bolts isn't much. Like 16 or 17ft-lbs.

 

[J DAMAGE]

Any torque requirements for the diff bolts? This is a very inexpensive modification I am darn interested in.

I did the ARP bearing cap studs also

ARP STUDS = 10ft lbs
STUD NUTS= 85-90ft lbs
Cover bolts = 25ft lbs
Load bolts = 5ft lbs
http://www.google.com/url?sa=t&sour...5IGwDw&usg=AFQjCNH39V9F45oJhzl9YF7ocTcOOayf2w