GEN 1 Power steering upgrades

[LAfreeride]

Please post a review of the Lee PS kit...
I’m looking at another pump since my 2nd one went to shitsville during a quick run in Barstow last Saturday.
Deciding between the Lee and the Howe kit which are $1295 and $1085 respectively.

 

[BenBB]

So I have a question. At what point does one consider retrofitting an EPAS from a '17? Rockauto has Motorcraft new for $1370.79 (well core is another $400). I'm pretty sure EPAS Peformance could help, not sure what the whole enchilada would set you back though. I'm thinking it would be a viable option if my rack fails.

Also wondering if a universal GM (I know, blasphemy) pump from Turn One might be an option if the pump is the main issue. If the stock pump I replaced earlier this year starts whining again that could be worth trying, especially if I could rebuild the little ******.

 

[CarmanKyle]

I"m not sure if it fits, but a ps pump from a '10 is a cast iron/steel unit and holds up to the heat better. I have beaten the shiiiit out of my '10 and haven't had pump issues. I also have a 8x11 tube/fin ps cooler.

 

[602Raptor]

My truck is in getting a new rack today. I purchased this reservoir and will be installing soon. It looks very similar to the GJ setup, but much cheaper.

https://www.kartek.com/parts/kartek...ir-with-filter-and-pressure-relief-valve.html

I bought the clamp that goes with it, but will need to fab a mount. Any recommendation on new hose? I'll post up some pics once installed.

 

[ut1jas]

https://www.kartek.com/parts/kartek...ir-with-filter-and-pressure-relief-valve.html



I used the same reservoir with a 2 row cooler and a new pump. I used Pushloc hose (#6 for the cooler and #10 to the pump). Its been great for 3000 miles so far, the last pump lasted about 1500 miles.

 

[602Raptor]

Thanks for the info.

I ordered the two additional fittings:

1) Fragola AN -10 Black Anodized Aluminum Series 8000 Push-Lite 90 Degree Bent Tube Hose Ends
1) Fragola AN -8 Female To -6 Push Lock Hose Black Anodized Aluminum Reducer 90 Degree Hose Ends

I’m hoping to reuse the stock hoses and use new screw type hose clamps.

 

[602Raptor]

Here's a few pics of my completed installation. This is a Kartek reservoir is a compliment to my brand new steering rack. I had one hell of a time getting the old hose off the pump. I ended up cutting the old hose off at the pump nipple and cutting the clamp off with a Dremel. I would love to see how a professional mechanic would have handled that stupid hose. Anyways, I have about 500 miles so far and the fluid looks great. Total cost here with the reservoir, fittings, and hoses was about $280. The bracket is a piece of flat steel i bent in a _|--|_ shape.

 

[gtxracer]

Here's a few pics of my completed installation. This is a Kartek reservoir is a compliment to my brand new steering rack. I had one hell of a time getting the old hose off the pump. I ended up cutting the old hose off at the pump nipple and cutting the clamp off with a Dremel. I would love to see how a professional mechanic would have handled that stupid hose. Anyways, I have about 500 miles so far and the fluid looks great. Total cost here with the reservoir, fittings, and hoses was about $280. The bracket is a piece of flat steel i bent in a _|--|_ shape.

View attachment 117038 View attachment 117039

Did you happen to ask when they recommend changing filters? I've always changed PS filters every 3-4 oil changes or when noticing a buildup but PS systems rarely have contaminates since they're "sealed". I was planning to do this upgrade but haven't had issues since switching to Amsoil fluid instead of ATF.

 

[OffroadAlliance.com]

We just received a small batch of the RPG Power Steering Reservoirs this afternoon. Only available in blue.


Link --->>> OFFROADALLIANCE.COM

 

[NMBoondocker]

Can anyone confirm if the GJ PS cooler works with the larger OEM trans cooler (DL3Z-7A095-B, standard on Saudi Raptors)?

I can't tell if the two will interfere but it looks like NE Ford might be running the same cooler.