Pompsy's 2020 Oxford White SCREW Build

[Pompsy]

Hello all,

Brand new to the forum so figured I'd dive right in. I recently purchased a 2020 Oxford White SCREW 802a. So far, I am absolutely loving this truck! Giddy like a little school girl every time I drive it! I don't plan on doing a major build (for now) like I did with my 01 F-150 Lariat. I am planning on small and subtle changes to put my own touches on the truck but to keep it as OEM as possible. Mostly cause I would love to trade this in if Ford confirms the the return of the V8 for the 2021 model. Listed below are the parts that I have been researching that I plan on putting them on as they come in. Attached are the OG pics with no mods done.

Exterior:
- Vinyl Paint Wrap - Ford GT Liquid Grey: https://www.ford.com/performance/gt/configurator/yl
- Badging Vinyl - To match Grey above
- Ceramic Window Tint - 25% Front Two Doors, 30% Back Two Doors, Rear Window, & Sun Roof
- Stubby Antenna: https://roninfactory.com/collections/ford/products/short-antenna-ford-f150-ford-raptor
- License Plate LED Lights: https://www.diodedynamics.com/194-hp3-led-bulbs.html
- Bed Cover: https://rollnlock.com/a-series
- Rear Wheel Liner: LineX'ed or Rhino Liner
- Front Bumper Lights - Looking to do a mount with tri-lights. Looking for recommendations for the furthest outer light to be amber, and the inner two to match the headlights.

Interior:
-Under Seat Storage: https://www.builtrightind.com/products/builtright-industries-velcro-tech-panel-kit


Any suggestions are welcome!

 

[CoronaRaptor]

Nice looking truck, mod list sounds legit, can't wait to see the transformation.

 

[Pompsy]

8/26/20 Update:

All the shops that I have talked to don't seem to be able to match up the color that I want, Ford GT Liquid Grey. Due to that, I'll most likely be keeping it the OEM Oxford White. I may look into doing ceramic coating or a combo of PPF and ceramic. Any suggestions are appreciated! In good news, today StormtroopRaptor (best name I got so far ) got dropped off to get tinted! It turned out great and the difference is really felt with the ceramic tint!

Front Two Doors: 25%
Rear Two Doors: 30%
Rear Window: 30%
Sun/Moon Roof: 30%

 

[AKS]

how much the full tint run?

 

[Pompsy]

how much the full tint run?

Full tint ran me $540. I decided on 25% on the front two doors, 30% on the rear two doors, rear window, and the moon roof. I left the windshield non-tinted.

 

[Pompsy]

8/29/20 Update:

Antenna: Stubby Antenna from Ronin came in. Decided to go with the more low profile look rather than their more popular 50. Cal bullet antenna. Shipping was fast, 2 minute install (if that), and I enjoy not having the OEM antenna hit all the lower hanging branches in my neighborhood . I haven't noticed any drop off in radio reception for AM/FM but I think that's due to living in rather larger Tri-County Metro Region.

OEM Box Link: Forgot to install the actual devices into the bracket but stopped by the dealership I bought it from and they got it done with a tad bit of elbow grease . They also topped off my tank with 93 so all in all, a good day!

 

[desertfox73]

Looking forward to seeing the build. I'm taking mine in for tint (and lift/wheels/tires) and I'm going with the same tint you chose - looks great!

 

[Pompsy]

Looking forward to seeing the build. I'm taking mine in for tint (and lift/wheels/tires) and I'm going with the same tint you chose - looks great!

Thanks! The ceramic tint (never had it until this vehicle) really does make a difference temperature wise. Although the sun is coming in, it doesn't bring the South Florida mugginess with it. I'm still debating on whether or not to keep it mostly OEM with a few touches or go full build. I went full build with my F-150 and I'm getting the urge again!

 

[Pompsy]

9/9/20 Update:

Truck just got finished getting the ceramic coat along with putting on some minor decals: (1) Ford Performance on both sides of hood, (2) Raptor Overlay, and (3) American Flagon both sides of front door.

All graphics are from Rocky Mountain Graphics: https://rockymountaingraphics.com/product-category/2017-ford-raptor/

I'll post the professional pics that were taken of the process once I get them. Rappy looks better than when I first got it! It's all in the details!

 

[Pompsy]

Finally got around to getting these done. Pics came out even better than expected!