Old Man Build

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
O

Old-Raptor-guy

FRF Addict
Joined
Jul 25, 2021
Posts
1,909
Reaction score
4,503
Location
USA
I had to run the spacers from Alcon with my methods.
That makes a TON more sense now. For some weird reason I was thinking the clearance issues were in the barrel of the wheel not the spokes.

Factory wheel has much less clearance in the barrel.

We'll see how the ICONs fit. 25 offset with 1/4 inch spacer would be about +18 .
 

thatJeepguy

FRF Supporting Member
Supporting Member
Joined
Nov 28, 2021
Posts
2,499
Reaction score
3,719
Location
GA
says works with stock wheels and tires. "Working" is a little ambiguous i guess, says fully adjustable on the truck also and that is a load of horse shit.
Why did you go with these vs a serviceable delta joint with a grease fitting like the icon uca? Just curious…
 

Nex

RIP CoronaRaptor
Joined
Sep 2, 2021
Posts
8,627
Reaction score
24,781
Location
Washington State
That makes a TON more sense now. For some weird reason I was thinking the clearance issues were in the barrel of the wheel not the spokes.

Factory wheel has much less clearance in the barrel.

We'll see how the ICONs fit. 25 offset with 1/4 inch spacer would be about +18 .

20220621_165047.jpg
 
Top