GEN 2 OEM Genuine Ford Parts Scalable Shock Security System Kit

[RaptorMaryland]

I input "2019" and there is no option to pick "Ford". I guess the site hasn't updated for 2019 yet.

Try 2018

Its a standard add on part, no ford has unless you pay for it. It should work, just having the web site tell you, is a nice addition.

 

[dhmcfadin]

I input "2019" and there is no option to pick "Ford". I guess the site hasn't updated for 2019 yet.

18 will work fine.

Vehicle Security System, Ford Perimeter Plus - Ford (JS7Z-19A361-A)

https://www.tascaparts.com/oem-parts/ford-vehicle-security-system-ford-perimeter-plus-js7z19a361a

BajaMod Alarm Shock Sensor Bracket

http://bajamod.com/detail.php?product_code=BM1016&color=

 

[noleraptor]

I just got the bracket and module and the new JS7Z module only fits on the bracket with cable inputs facing the floor vs. pointing towards the seats with the older modules. Anyone have a picture of the new module mounted and how they ran the wires. I have a slight concern of catching a wire when applying the brakes. Sure I could zip tie it all up pretty good, but a picture of an install would be great. Thanks.

 

[RaptorMaryland]

No problems installing it that way.

 

[noleraptor]

Interesting. Looks like the newer ones now have the cable inputs on the "long" side of the module (see link below). Not sure why they changed it but will make seeing the shock sensitivity adjustment knob interesting since it will face the floor!

https://accessories.ford.com/electronic-module-11886.html

 

[mcgleevn]

2018 SCREW - just installed the kit... used JS7Z-19A361-A w/ LED

I used the bracket the brake controller module was attached to... the plastic case was mostly hollow so I used two small screws around the factory "baja mod" like bracket into said module. Very secure and there's access to sensitivity dial. Plenty of room to tuck excess wires up towards the steering wheel and secured with zip ties.

I was able to mount the LED in the OH **** handle (instructions warn against installing where airbags deploy... I like to live dangerously)


The OE instructions which I have access to being a Ford employee state once security module is installed, only a key ON, OFF, ON is needed for the truck to recognize the new module - remote start, interior motion sensors, all original functionality was retained.

 

[JohnyPython]

Interested

 

[K1llD4shN1n3]

2018 SCREW - just installed the kit... used JS7Z-19A361-A w/ LED

I used the bracket the brake controller module was attached to... the plastic case was mostly hollow so I used two small screws around the factory "baja mod" like bracket into said module. Very secure and there's access to sensitivity dial. Plenty of room to tuck excess wires up towards the steering wheel and secured with zip ties.

I was able to mount the LED in the OH **** handle (instructions warn against installing where airbags deploy... I like to live dangerously)

The OE instructions which I have access to being a Ford employee state once security module is installed, only a key ON, OFF, ON is needed for the truck to recognize the new module - remote start, interior motion sensors, all original functionality was retained.

Nice! I’m just waiting on my baja mod bracket to arrive so I can install this.


Sent from my iPhone using Tapatalk

 

[Fender]

U dont need it really, i used the included zipties to secure it to another module, sitting real nice

 

[dhmcfadin]

Nice! I’m just waiting on my baja mod bracket to arrive so I can install this.


Sent from my iPhone using Tapatalk

The bracket is great and allows the unit to mount to a stationary surface directly connected to body so it has the best chance at detecting shock and vibration!