Mike P Build

[paj1978]

rear bumper lights

I want your rear bumper! What lights are those in the middle holes??? I've been contemplating something along these lines for quite some time...

These little bad boys are from Vision X.. RPG or TMX has all the details..

---------- Post added at 09:55 AM ---------- Previous post was at 09:51 AM ----------

Pure-awesomeness is correct though!! Here's another pic My lady shot! Excuse the ****** iPhone pic.

To much fun, I honestly hit that jump about 50% faster then I wanted to.

which is why they flattened it out after hour jump..

on another note I have no reference on my lap times as each time I had to stop for one reason or an other....

---------- Post added at 10:00 AM ---------- Previous post was at 09:55 AM ----------

Spoke to mike. The rear lights are all visionX bumper and rack. All light on the truck are visionX lol. With the cannons, 21" bar in bumper and the 5 lights in light rack he's pushing 65,000 lumens! Sick....


Sent from my SCH-I545 using Tapatalk

I honestly could have squeezed one more HID uptop and maybe two more cannons on the bumper...

And for a reference, I tested them out for the first time at the Raptoberfest and got to the event at night time, having never even seen it before, and ran it twice in the dead of night...

not once was I like... " i need more light" driving durring the day is boring after you do a couple of night runs..

I was not holding back either.. ask corey or jacques.. In fact jacques and I rand the course backwards as well, and take my word for it, it was much harder. but still heaps of light..

 

[paj1978]

awesome build!

dare I say... whats next?

well maybe after finding all the limits after Raptoberfest, I think that RPG LCAs and duals up front, with the trough the bed shocks in the back. new bed cage and bolt in cage..

then a new radiator and transcooler...

mabe swap all the cannons for the new vision X 70w HIDs

Need all of this before TRR

 

[paj1978]

So as TRR gets closer and the anxiety get worse and worse.. the boys at TMX and RPG are pulling it all together for one last epic push to the finish line....

Here is some teaser pics full list to be revealed soon....

 

[paj1978]

and a couple more

 

[SwampKing]

No complete pic of the rap?! Weak mike...WEAK I TELL YA!!

 

[paj1978]

No complete pic of the rap?! Weak mike...WEAK I TELL YA!!

who said anything about a wrap ......

 

[SwampKing]

Rap=short for Raptor ya goof!!! Lol

 

[paj1978]

She is off the lift and driving around....

here is the work list so far...

1. RPG LCA and dual front shocks
2. 16" 3.5 sox in the rear with bed cage and new +2 HD Nationals and RPG shackles
3. 4.88 rear gears and 2wd only as front drive train removed
4. Stainless works headers
5. fresh 93 tune
6. new monster radiator from CBR
7. PS cooler and filter
8. Tranny cooler and filter
9. Interior LED package (thanks Motomute)
10. Harness bar
11. 3" 4 point harness
12. JLT air/oil sep

 

[paj1978]

here is the work list so far...

1. RPG LCA and dual front shocks
2. 16" 3.5 sox in the rear with bed cage and new +2 HD Nationals and RPG shackles
3. 4.88 rear gears and 2wd only as front drive train removed
4. Stainless works headers
5. fresh 93 tune
6. new monster radiator from CBR
7. PS cooler and filter
8. Tranny cooler and filter
9. Interior LED package (thanks Motomute)
10. Harness bar
11. 3" 4 point harness
12. JLT air/oil sep

here are a few sneak peaks

 

[canamds450]

Is that bedcage bolt on? I m interested in a bed cage suspension set up, where i live welding labor is cheap and know some guys very good in welding, let me know if that bed cage can be sell out the chop thanks


Sent from my iPad using Tapatalk