LP6's on the Bumper

[Chazzersgarage]

Ok. Down the rabbit hole we go. I'm looking at possible lighting upgrades. I'm thinking about mounting 4 LP6's or possibly 2 LP6's and 2 LP9's on the front bumper. I want to space them out enough so the lights don't interfere with the camera. I've looked at the front light bars available from several vendors but all of them seem to block the lower vision in front. Can these lights be mounted directly to the bumper without any other concerns?

 

[Nex]

Depends if you want to drill into your bumper or not. The LP6s and 9s have 3 bolts per light. I am running 4 LP9s on a SVC frame cut bumper on a Gen 2. My camera is blocked but that's not a concern for me. Think @smurfslayer has some type of light bar on his Gen 2.

 

[smurfslayer]

N-Fab light bar.

Not sure if they have a solution out for Jen Tres. There’s very minimal camera obstruction. I may do one more inboard pair of lights, however I’m thinking if I go big, then the S8 needs to find a new home as I don’t want to introduce cooling problems.

 

[Nex]

I may do one more inboard pair of lights

 

[figure1a]

You can always do a camera relocate kit and then just put the lights that you want on there where you really want them.

 

[Chazzersgarage]

Camera relocate?

 

[figure1a]

I used this one:

 

[Chazzersgarage]

Thanks

 

[Littlefx4]

I used this one:

View attachment 398280

Link to this camera relocation kit please.

 

[pastorwug]

I used this one:

View attachment 398280

That is really cool, wish it came for Gen 2!