Sage
FRF Addict
Took the lid to a custom upholstery shop. $75.00 to cover it with high quality black leather.
Leather Console Lid Upgrade
- Thread starter AndyR
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
mprice1234
SVT Gen 1 Rules
Yes, it will work but this part number has the white stitching if you are ok with that, If you want the black stitching the part number is BL3Z1606024BA.
btkeenan
Active Member
Did this on my truck today after realizing they made leather wrapped ones. I ordered BL3Z1606024BA off a seller on eBay for a good price and install was smooth and took less than 10 min. I should mention I called my local dealer who kept telling me it wasn’t compatible with my truck and it was NLA but then they looked again and there was 1 left in the country but that they could not provide pricing until placing it on special order. YMMV
Last edited:
I bought a blue stitched leather cover on Ebay and did it myself since you can't get the blue stitching with an OEM cover.
I glued 1" thick high density foam on first. It's way nicer than OEM to use as an arm rest. Covered the foam with a layer of a muslin/batting to let the leather slide nicely over the foam. Then I glued the edges only of the leather and the console cover and attached the cover, starting at the middle in front/back, then on the sides, then work your way out from each center. Do it on a warm day and pull it tight. Trim off any excess and put the cover back together.
The contact adhesive I used is linked below. Works great.
Foam
I glued 1" thick high density foam on first. It's way nicer than OEM to use as an arm rest. Covered the foam with a layer of a muslin/batting to let the leather slide nicely over the foam. Then I glued the edges only of the leather and the console cover and attached the cover, starting at the middle in front/back, then on the sides, then work your way out from each center. Do it on a warm day and pull it tight. Trim off any excess and put the cover back together.
The contact adhesive I used is linked below. Works great.
Foam
Last edited:
602Raptor
Full Access Member
Sounds cool. Will you a share a pic?
Irregular F150
its terrain good sir!
Subtle and nice
mprice1234
SVT Gen 1 Rules
Puffy like my tummy after eating to many Naco's.
