Hazzard
Full Access Member
Any update on this? It seemed very interesting
King 4inch Bumpstop install
- Thread starter Sgt Fast
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
skyscraper
FRF Addict
- Joined
- Sep 3, 2013
- Posts
- 1,447
- Reaction score
- 619
Thanks for a cool thread. At least you have the balls to try something that probably hasn't been done on a raptor! Let us know how it goes man.
OP
OP
Sgt Fast
Full Access Member
- Joined
- May 29, 2013
- Posts
- 122
- Reaction score
- 64
Took my truck out for a little run this weekend and jumped some things and so far it rides like a dream. no problems I will attach a go pro to the bottom of my truck and try to get yall a video within a few days.
Hazzard
Full Access Member
thanks for the update
Turf Tamer
Full Access Member
Cricket cricket.
kawie95
Full Access Member
OP
OP
Sgt Fast
Full Access Member
- Joined
- May 29, 2013
- Posts
- 122
- Reaction score
- 64
Ill get a chance this weekend. video soon!!
OP
OP
Sgt Fast
Full Access Member
- Joined
- May 29, 2013
- Posts
- 122
- Reaction score
- 64
It’s been raining here and i have gone out and jumped some things so far i was only able to push the bump stops in three inches by judging how far the O ring on the stops are pushed down. I will put a camera under the truck when it gets less muddy so we can see what’s really going on when i jump things. I am planning on going to Prairie City with the rest of the NOR Cal Raptors and beating the crap out of it and definitely will put a camera under the truck to catch the carnage. Also the wife just bought me a TIG for my birthday so i will start some fabrication projects soon.
Canuck714
FRF Addict
I'm in SA and friends with the owners at Cycle Ranch (MX track) I can get you in for a play day.
Pm me your number
---------- Post added at 03:17 PM ---------- Previous post was at 03:14 PM ----------
Doh!! Just read your post about leaving in Feb... Ooops
Az Scooter
Full Access Member
- Joined
- Aug 8, 2013
- Posts
- 602
- Reaction score
- 209
As to whether or not it is strong, a similar thickness piece of tubing is stronger that a rectangle or square. That is because it spreads out the force. Think of a roll cage. There is a reason that they use round tubing instead of square tubing. If it was square tubing it would be a lot easier to bend and weld. It is because similar thickness is much stronger.
In my opinion, I think that he managed to strengthen the frame, if the Tubing is at least the same thickness as the frame, and if it goes through the frame all the way.
Way to think outside of the box and get a lot of additional strength in the truck.
In my opinion, I think that he managed to strengthen the frame, if the Tubing is at least the same thickness as the frame, and if it goes through the frame all the way.
Way to think outside of the box and get a lot of additional strength in the truck.
Similar threads
