Ironside's 2012 build.

[BearLeeAsian]

You have a busy week

 

[ironside]

Yep

 

[Yukon Joe]

You should look into some rear shock mount reinforcing plates.

Also, for the missing hardware on that icon shocks. Did you order them new? Our used via private sale? I thought it was used and I didn't want folks thinking icon forget to ship you some hardware.

Yukon Joe
www.RUNRAPTORRUN.com

 

[ironside]

You should look into some rear shock mount reinforcing plates.

Also, for the missing hardware on that icon shocks. Did you order them new? Our used via private sale? I thought it was used and I didn't want folks thinking icon forget to ship you some hardware.

Yukon Joe
www.RUNRAPTORRUN.com

Yes they were used off an FRF member and I got an awesome deal so I'm not complaining just stressed. I talked with labraptor about that I might get some made or buy some of the saints offroad shock mount reinforcement package. It might just be cheaper to have some made up and welded on. I might have to talk to jimmy about that cause I'm thinking I'll go as far as kc on Thursday then drive down the rest on Friday.

 

[ironside]

Installed an ICOM f5021, and ran wires for when I install amber cyclones at ARDD.

 

[Labraptor]

Did you find parts to finish shock install?

 

[ironside]

Did you find parts to finish shock install?

They are coming over night from icon so should have them some time tomorrow

 

[ironside]

Next thing I need is a bump stop kit and a set of uca's

 

[Huck]

Yes they were used off an FRF member and I got an awesome deal so I'm not complaining just stressed. I talked with labraptor about that I might get some made or buy some of the saints offroad shock mount reinforcement package. It might just be cheaper to have some made up and welded on. I might have to talk to jimmy about that cause I'm thinking I'll go as far as kc on Thursday then drive down the rest on Friday.

I can send you the prints for what i designed for labraptor.

 

[ironside]

I can send you the prints for what i designed for labraptor.

He offered to pass them on I would just need to find a fabricator. I know an old guy that could prolly do it but haven't had a chance to talk to him plus I'm really running out of time
The other option would be to see if Jimmy had time on Friday morning to weld some up quick for me. Since I'm most likely driving to kc Thursday