Installed CVFab Intercooler-Nice piece

[Flash1034]

As the title says, I installed the CV Fab intercooler. Took me and a buddy about an hour. It’s a quality piece and far better than the stock intercooler. I noticed last week when it was 115 degrees that my performance really dropped off. I’m sure the new cooler will help with that.

 

[gdestiny]

Did you have to make any modifications to install it?

 

[Flash1034]

No sir. Bolts right in.

 

[Ali 556]

The major benefit you will get is @WOT,on partial throttle, not much air going threw to be cooled, I highly recommend S&B intake or any intake with closed box to maximize the effect.

 

[chi_weezy]

It’s on my list after doing much research. Was originally going to go FMIC but it blocks the radiator and the install looks like more than I want to tackle. Since I’m upgrading my bumper I figure it’s a good time to swap the IC

 

[Ski4Ever]

Did you have to make any modifications to install it?

No sir. Bolts right in.

@Flash1034 did you not have to remove the plastic shroud that sits on the back side of the shutters? I just installed my CVF IC on Saturday and had to remove that piece. Other than that, it's definitely as simple as removing the old IC, swapping a couple pieces over from the old to the new, and then installing the new IC in place!

 

[Flash1034]

I did remove the plastic shroud.

 

[Nick@Apollo-Optics]

We have the CVF kits available if anyone is in the market. Enter CVF5 at checkout to save 5%!

CVF Titan Intercooler (2015+ Ford F-150 2.7L/3.5L/Raptor EcoBoost)

 

[Ski4Ever]

@Flash1034, when you removed your OEM IC, was there any oil inside the hot side (blue) hoses? Mine had a little...I'm not sure if that's normal or not.

 

[Muchmore]

@Flash1034, when you removed your OEM IC, was there any oil inside the hot side (blue) hoses? Mine had a little...I'm not sure if that's normal or not.

Normal. Unless you have some kind of catch can or something setup. Mine had a small, small amount.