Icon Collars

[Raptorx]

Hey all,

Just wanted to get some opinions. I am getting my Icon collars put on and I am torn between 1.5 or 1.75. I am also getting Icon Rebound wheels put on the stock tires. I do have RokBlokz mud flaps on there now. Will it make a differance what height I go with?

Thanks.

 

[Pacific Wheel]

Do the 1.75". Slight rake with minimal preload. And the switch from 1.75 to 2.25 with the Icon collar is really simple in case it's not high enough at 1.75.

 

[xrocket21]

1.5 still has rake, so will 1.75. 2.25 is what it takes to make it level.

 

[Raptorx]

Thanks for the feedback. Also a shout out to Justin for great service on the Icon Rebounds. Look forward to getting them on the Raptor.

 

[butts182]

Measure the height difference from the ground in front and back. I went with 1.5” and the front is now slightly higher. I also went with the 1.5” because that’s what ICON recommends.

 

[TXBrian]

Measure the height difference from the ground in front and back. I went with 1.5” and the front is now slightly higher. I also went with the 1.5” because that’s what ICON recommends.

The front shouldn't be higher if you went 1.5".
Are your rear springs shot or do you carry a lot of weight in the bed ?

 

[butts182]

Nope. SCAB. 37s too