HOW TO: 2019+ Live Valve Recalibration - FORScan

[blwn]

This is a step by step to reset the live valve shocks after suspension modifications have been made. This assumes you are somewhat familiar with FORScan, but I've tried to make it as thorough as possible.

** Important Notes**
- FORScan version 2.3.39 or higher needed https://forscan.org/download.html
- If you have a saved profile select "No" to create a new profile.
(These can be managed in the profiles tab if you want to delete previous profiles)
- This needs to be performed on a level surface and you will need to pick a fuel level selection so being close to a fuel level mark will be the most accurate.


Step 1: Click the "Read PID Data" Icon
Step 2: Double Click an empty cell to bring up the "Select PIDs dialog". Use the drop down to select "VDM"
Step 3: Select the XX_Height PIDs and click the right arrow to add them to the Selected PIDs column
Step 4: Click the Check to add the selected PIDs to your dashboard

Fig 1:


Step 5: Click the Start/Play button at the bottom of the screen to display your current values

(My suspension is stock and must have settled so I'm showing negative values)

Step 6: Click the stop icon to stop the live dashboard

Step 7: Click the "Service Functions" Icon (the wrench)

Step 8: Find the VDM - Ride Height Calibration Function and select it


Step 9: Click the Start/Play button to start the service procedure

You will see this Warning:

Step 10: Make sure all the conditions are met before clicking Ok to proceed

Step 11: Select your closest fuel level and click Ok:

 

[blwn]

Confirm the service procedure completed successfully


Repeat steps 1 - 6 to verify your ride height is now reset to 0
(the rear height is inferred from the front and may not show as zero)

 

[LeadFootLarry]

Very cool to see they are adding that, this will hopefully help a lot of users who get their springs done at independent shops who don’t have access to IDS! Thanks for sharing

 

[HOLLYWOOD 1]

Great information!

Big Blue, how about making this a sticky?

 

[JT_AZ]

Thanks for the info! Just installed my eibachs, I’ll be waiting on this to be released.

 

[Deleted member 12951]

Any idea when it will be released? I purchased the Lifelong license as these folks deserve to be paid for their work.

 

[blwn]

I'm not sure on an ETA for the release, but if someone really needs it now they could probably use the test version they sent me. I wouldn't use it for anything besides running this VDM recalibration though

 

[OEMPlus Raptor]

Sub'd!

 

[Mmm]

Subbed

 

[K223]

Great information!

Big Blue, how about making this a sticky?

@Big Blue if you will do the honors, thanks