Hi beam relay trigger wire?

[Palmetto_Raptor]

On my previous F150 I found a headlight extension. Basically a male and female plug that could be plugged in-line behind the headlight.

You tap into the extension so you don't have to cut the factory harness.

Something like this. Don't know if they would work with the 2019 Raptors but there's probably one that will.

https://www.ebay.com/itm/2pcs-Ceram...:F-150&hash=item25bce05840:g:b1YAAOSwY0lXRaiT

 

[Speeddeacon]

Thanks. That might be a a good option.


Sent from my iPhone using Tapatalk

 

[Slow6]

Also there is an option to build your own jumper harness to tap into high beam, low beam or running light.

Somewhere on here I had posted the part numbers for both sides of the connector to do this without splicing into factory harness. Pictures below are all I could come up with. I have both sides of the connector sitting in my tool box but haven’t hooked it up on my SP-9100 yet.





Sent from my iPhone using Tapatalk

 

[Slow6]

wpt1279 and wpt1321 are the two connector kits you need, sorry for the ginormous photos.

Also https://www.fordraptorforum.com/threads/having-high-beam-switch-control.57867/

Check out page 8. One member already did this for a trigger wire. I still haven't

Also important to note the wire diagram I posted is for a 2018....

 

[Speeddeacon]

Awesome, thanks Slow!


Sent from my iPhone using Tapatalk