Help with Kicker sub install..

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Xtinct

Full Access Member
Joined
Jan 14, 2017
Posts
385
Reaction score
249
Location
Nebraska
I ended up talking to kicker tech support and they were super helpful. They said I’d be better off with the vkl3t and having it turned on with forscan. With the auto start stop I would have issues installing a hideaway or aftermarket sub.

Do you have the B&O system or the Sony?
 

FoShizzle

Active Member
Joined
Apr 10, 2018
Posts
70
Reaction score
60
I ended up talking to kicker tech support and they were super helpful. They said I’d be better off with the vkl3t and having it turned on with forscan. With the auto start stop I would have issues installing a hideaway or aftermarket sub.
Good info on the kit. FWIW I have zero issues with my aftermarket setup and auto start/stop.
 
OP
OP
B

BRaptorr

Member
Joined
May 16, 2019
Posts
13
Reaction score
11
Location
ohio
Foshizzle did you use a plug n play harness for yours? I have the 8” sync 3 touchscreen and the 7 speaker system
 

FoShizzle

Active Member
Joined
Apr 10, 2018
Posts
70
Reaction score
60
Foshizzle did you use a plug n play harness for yours? I have the 8” sync 3 touchscreen and the 7 speaker system
I have the same "upgraded" B&O system from the 802A package. I just cut off the end of the OEM connector to the factory speaker and put on some RCA connectors (LINK) to the amp I added on. Heres my setup:
photo oct 12, 5 37 50 pm.jpg
 

smurfslayer

Be vewwy, vewwy quiet. We’re hunting sasquatch77
Joined
Dec 16, 2016
Posts
17,685
Reaction score
27,282
I didn’t know you could go this route with the b&o, but awesome. That looks almost identical to the way I had it set up before the total upgrade stage.
 
OP
OP
B

BRaptorr

Member
Joined
May 16, 2019
Posts
13
Reaction score
11
Location
ohio
Very nice! Any speaker recommendations? My last 16 f150 I installed kickers all around, but it seems they lacked output at higher volumes. I was looking into inifinity references . .
 

NE Raptor

Full Access Member
Joined
Oct 23, 2018
Posts
381
Reaction score
281
Location
Massachusetts
I have the same "upgraded" B&O system from the 802A package. I just cut off the end of the OEM connector to the factory speaker and put on some RCA connectors (LINK) to the amp I added on. Heres my setup:
View attachment 139689


interesting way to do it - how do you like it? much better than factory?? i am almost to the point of upgrading
 
Top