GEN 1 Harsh 5-4 Downshift and Hesitation at Highway Speeds

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
Raptor Embroidery

Raptor Embroidery

aka <b><font color='darkorange'>Raptor_Al_41</font
Joined
Jan 23, 2012
Posts
3,959
Reaction score
1,433
Location
Scottsboro, Alabama
anything new?
Not so far. I'm awaiting an open spot at the shop. I've been so busy these past few weeks that I had a missed opportunity last week. It's so bad that transmission temp gets up quickly in 5th and 6th gear.

Sent from my VS985 4G using Tapatalk
 
OP
OP
Raptor Embroidery

Raptor Embroidery

aka <b><font color='darkorange'>Raptor_Al_41</font
Joined
Jan 23, 2012
Posts
3,959
Reaction score
1,433
Location
Scottsboro, Alabama
Update:

Loss of line pressure stemming from a malfunctioning valve body burned up 3 sets of clutch packs resulting in slipping/overheating.

Its getting the following

-sonnax valve body zip kit (fixes the root issues in the factory valve body)
-exedy stage 2 clutch packs all the way through
-precision industries 2500 rpm stall converter
-+3 quart deep trans pan w/ heat sink fins
-all new seals all the way through.

Sent from my VS985 4G using Tapatalk
 

MatMan

Full Access Member
Joined
Jun 7, 2012
Posts
890
Reaction score
447
Location
AridZona
What's the general cost for the kit, clutch plates and stall converter?

And thanks for all of your research and sharing it with the world.
 
Last edited:
Top