Happy Thanksgiving from ICON Vehicle Dynamics to You!

[ICONRep]

We here at ICON Vehicle Dynamics want to thank our dedicated fans and wish you all a Happy Thanksgiving. For those of you that are hitting some trails or doing something cool with your Ford Raptor we would love to see it!

Have a great weekend and stay safe!

 

[justvettn]

Thanks ICON Rep! What offset and backspacing are the ProAm wheels that you guys sell? The ones that are on the Icon Raptor truck.

---------- Post added at 02:50 PM ---------- Previous post was at 02:36 PM ----------

Found some info 17X8.5 with 4.875 backspacing, so I'm guessing about a +2 or 3 offset?

 

[ICONRep]

Thanks ICON Rep! What offset and backspacing are the ProAm wheels that you guys sell? The ones that are on the Icon Raptor truck.

---------- Post added at 02:50 PM ---------- Previous post was at 02:36 PM ----------

Found some info 17X8.5 with 4.875 backspacing, so I'm guessing about a +2 or 3 offset?

Offset and back spacing are really the same thing just 2 different ways of looking at it.

Backspace - is generally the measurement from the back lip of the wheel to inside flat pad that the hub sits up against

Offset (positive or negative) - is generally the measurement from the centerline of the wheel to where the inside flat pad that the hub sits up against is located. If the hub pad is on the front side of the center line it is positive offset or vise versa if it is on the backside of the center line it is negative offset

The Pro Am Racing Beadlock Wheels if I'm not mistaken are a +2.8mm offset

 

[justvettn]

I' m no expert but 20.8 seems high according to the chart could it possibly be 2.8

 

[rap7or]

Isn't 20.8mm roughly 3/4"?

Sent from my Galaxy Nexus using Tapatalk 2

 

[justvettn]

Just read a second info page on the Icon website which said they are 5.25 back spacing, I wonder which one is the typo or did they change from 5.25 to 4.875?

 

[ICONRep]

Just read a second info page on the Icon website which said they are 5.25 back spacing, I wonder which one is the typo or did they change from 5.25 to 4.875?

The 4.85 is correct....I will get the 5.25 one corrected.

---------- Post added at 02:52 PM ---------- Previous post was at 02:32 PM ----------

I' m no expert but 20.8 seems high according to the chart could it possibly be 2.8

Yes it should be 2.8....not sure where the 20 came from. Must have been out of it when I was typing!!!

 

[Pynenut]

Thanks! Happy turkey day! Enjoy with friends and family.

 

[Squatting Dog]

These wheels will fit all aftermarket UCA on the market at this time..

The offset/backspace (in my opinion) is the best setup for the Raptor. None of the issues with hub/wheel bearings like negative offset wheels.


-Greg