Had some new Progressive rate Spring made

[vanilla_gorilla]

I have always hated lifted trucks also. I just think the raptor needs to be lowered in the back 1" and what would be equivalent to mid perch height on the front for a dead level stance.

I am considering Geiser springs and deaver +1 rear springs. I wish someone had this setup for me to reference on 37x12.5 bfg all terrains

I agreee, i like the back to be a bit lower than the front, but i have the RPG bump stop kit, and I haven't put the taller shackles in yet to bring the rear down because then i'll lose the space between the bump pad and the bump stop...so i'm going to get these springs and stay on mid, with my 37 BFG ATs.

 

[Az Scooter]

I really like my WSI rears. They are about as perfect as a guy could expect. Mine is set on the lower slot of the adjustable shackles. I like it a lot.

 

[Runnhyd]

Any photos available?


Sent from my iPhone using Tapatalk

 

[hyrepower]

Pics please!!!

 

[Az Scooter]

What are you wanting pic's of? On the previous page is a picture of my truck, and how it sits with the Geiser springs on bottom perch, and WSI springs.

 

[Johnny]

Another new product from Geiser Offroad

GEISER OFFROAD PRODUCTS FORD RAPTOR F150 2" FRONT LEVELING KIT



Wanting to add 35"s to your Raptor without spending an arm and a leg? Geiser Offroad Products has you covered with their 2" front leveling kit. Comes with everything you need! Max tire size available after the kit installation is 35" x 12.5". Lift the front suspension of your coil-spring pickup truck an inch and a half or two full inches by installing these spacers above the springs. Level your truck’s appearance, and make room for moderately larger wheels and tires. Machined in house at Geiser Offroad, made in the USA out of T6 billet aluminum. Anodized BLUE to give you that custom appearance. Give us a call at 480-718-5511 to get yours today!

$249.95


---


Also we do have springs in stock and ready to ship out same day!

GEISER OFFROAD PRODUCTS FORD RAPTOR F150 PROGRESSIVE FRONT SPRINGS 2" LIFT







Need a little extra lift out of your ford raptor to run bigger tires and don't want to sacrifice ride quality?!? Well we did too, so we had custom progressive rate springs designed for the ford raptor f150 models to give you ~2" of lift in the front of your truck while still providing an excellent ride. These springs will accommodate up to a 37" tall tire. Some inner fender well trimming maybe required depending on your wheel offset. Springs come powder coated silver as shown. No spacers required, simply change the spring and you are done. Will work on trucks with OEM or aftermarket front bumpers.

$499.95

 

[Runnhyd]

Hey jonny sorry to take you off subject love the springs and can't wait to order mine. Question what's the average cost to have the springs swooped out? Does ford have to do it to avoid and warranty bs? Also who makes the wheels on the white screw? Thanks again!!!


Sent from my iPhone using Tapatalk

 

[hyrepower]

What are you wanting pic's of? On the previous page is a picture of my truck, and how it sits with the Geiser springs on bottom perch, and WSI springs.

Don't the WSI springs lift the rear or at least leave it level. I would like to see pics of the Geiser springs on bottom perch and rear lowered 1 inch.

Im guessing there would be about 1/2" difference in height difference to be close to dead level with that setup. yours looks higher in the rear.

 

[1stSFG]

FINALLY got my springs installed. Now I just need to get em on! It's freaking like Sri Lanka here with the humidity today. The camera lens is impossible to keep dry. I'll post before and after profile shots of the truck with measurements and what equipment it has. Soon.

 

[1stSFG]

I hope Johnny is lurking in here. I could use some touch up paint if it's available? Dude had some issues getting the first spring out after installed and there was collateral damage.