GROUP BUY: SS Braided brake lines

[cubiefan101]

Is this for 2010 too. Heres my rear lines






Im confused........


Will this work?

 

[cbcgeneral]

OK I just got off the phone with Crown and this is what I was told.
The 2 lines that do not get swapped out are the 2 rear caliper lines.
The hard line will not separate from the flex but if you want it swapped out you could have someone flare the end with the proper fitting then you could switch over all of the lines.

Pictures below show a 2014 and my 2010 connections.

2014

2010
Drivers side

Passenger side

So guys check these ends.

This is how my 2013 looks also so which set do I need. Man this is the most stressful group buy ever. I think it's actually been giving me grey hair. Lol.

 

[IRONMAN]

OK, I am confused now (it doesn't take much ) do all 6 lines still get used for the early models? I have a 2011

No your 2011 should be the 6 pcs.

---------- Post added at 02:18 PM ---------- Previous post was at 02:17 PM ----------

Is this for 2010 too. Heres my rear lines

View attachment 65592




Im confused........


Will this work?

You need the 6 pcs as well.
Let me use your pics here to explain better.
Give me a few.

 

[IRONMAN]

This picture is from a 6pc kit. 2010
This is the Passenger side.

A = hard line coming from junction on rear axle
B = This is the thread that screws into C
C = This is the threaded end of your flex brake line which unscrews from B
D = This is the hook to hold your brake line to the axle.
E = Flex line going to your caliper on the passenger side.

2014 Raptor

Do you guys see the difference?

 

[cubiefan101]

So for my 2010 i shouldnt have any problems swapping the new brake lines in then right?

 

[IRONMAN]

So for my 2010 i shouldnt have any problems swapping the new brake lines in then right?

Right, you'll have the complete 6pc swap.

 

[cubiefan101]

But if i want the caliper lines swapped i have to get them flarred?

 

[Ironhorse07]

 

[jim f]

But if i want the caliper lines swapped i have to get them flarred?

Or swap them out with the lines for a 2012 or earlier.
Roger, can you provide the hard lines with the flares for a full swap??

 

[cubiefan101]

Ill just do the fronts and part of the rears and have a shop reflare the rears.