Grille shutter codes preventing startup

[AmaRaptor]

I was wondering if anyone could help with a problem. I installed a Cobb FMIC about 6 months ago and when removing the grille shutters, I left the grille shutter motors plugged in and zip tied out of the way. It has gotten increasingly colder over the last couple months and started noticing a prevention in truck startup. At first it seemed like a starter problem so I replaced the starter. No avail! So randomly checked to see if there were any dtc codes and sure enough, 2 for grille shutter. I cleared them and the truck started right up. It continues to come up and prevents startup. Showing a wrench light on the dash now as well. Has anyone experienced this or gone with unplugging the motors altogether? Any feedback would help.

 

[HighwaySentinel]

Send a message to the person who started the thread below. He mentioned he 3d printed a solution for your issue.

Intercooler Shutters - removal.

Since lower temps = moar power :) I'm not having anything block my air flow lol. Today my goal was to remove them while in the process of installing my COBB OEM mount intercooler. This is what I know: Just unplugging the motor that controls the shutters will throw a code. Removing the...

www.fordraptorforum.com

 

[Zeusmotorworks]

I was wondering if anyone could help with a problem. I installed a Cobb FMIC about 6 months ago and when removing the grille shutters, I left the grille shutter motors plugged in and zip tied out of the way. It has gotten increasingly colder over the last couple months and started noticing a prevention in truck startup. At first it seemed like a starter problem so I replaced the starter. No avail! So randomly checked to see if there were any dtc codes and sure enough, 2 for grille shutter. I cleared them and the truck started right up. It continues to come up and prevents startup. Showing a wrench light on the dash now as well. Has anyone experienced this or gone with unplugging the motors altogether? Any feedback would help.

Is this a GEN 2? I removed the shutters themselves and left everything else in place. At 80k with no issues.

 

[AmaRaptor]

Is this a GEN 2? I removed the shutters themselves and left everything else in place. At 80k with no issues.

Yes gen 2. I removed the shutters as well but left the motors. Haven’t had any problems until recently with the close to 0 degree weather.

 

[Zeusmotorworks]

Interesting... mine has seen teens but that is it.

 

[smurfslayer]

well... he’s in the colder part of the country... Texas !
( he types while staring out at --FROST-- FFS )