GJ Motorsports 3rd brakelight/chase light install video

[4x4TruckLEDs.com]

Well Baja Designs does not make the sPOD, although I GUESS technically they DO now, since Bestop bought sPOD and Bestop owns Baja Designs.

Now you can't dim them ALL the way down as eventually the light will turn off, but you will be able to turn it down a bit. Keep in mind you are now adding a lot of extra wiring, as sPOD is a switch panel itself.

 

[Birdnutz]

Thanks for all your responses, looking at this and not the controller:

Baja Designs LP-Series Controller Module Harness​

SKU:640168

 

[4x4TruckLEDs.com]

Thanks for all your responses, looking at this and not the controller:

Baja Designs LP-Series Controller Module Harness​

SKU:640168

?? That has nothing to do with the GJ Motorsports Kit... that's for LP Series lights and gives you 4 wires on the end...

 

[Birdnutz]

?? That has nothing to do with the GJ Motorsports Kit... that's for LP Series lights and gives you 4 wires on the end...

Yep, was hoping to tie it in with the harness. The problem is you have to run the power to the stop/turn signal lights for the chase lights to even work……

 

[4x4TruckLEDs.com]

The stop/tail/turn harness is honestly a harness most people get so they can strobe their lights. I might have one or two customers that actually use it for its intended purpose.