GEN3 Forscan

[AARaptor]

I had turned on my marker lights at all times through forscan. How do I revert back to OEM, just on that setting without messing with any of my other changes?

 

[MORaptor1]

I had turned on my marker lights at all times through forscan. How do I revert back to OEM, just on that setting without messing with any of my other changes?

Change the one or two digits back to what they were.

 

[AARaptor]

Change the one or two digits back to what they were.

How do I go about finding out what those digits should be?

 

[MORaptor1]

How do I go about finding out what those digits should be?

Should be an “as built” forscan thread here. I’ll look and see if I can find.

 

[AARaptor]

Should be an “as built” forscan thread here. I’ll look and see if I can find.

View attachment 479878

Awesome, thanks man!!

 

[chacquie]

Just following up. The fix was to disable the “adaptive front lighting system” in SCCM.

 

[higherup]

Is there anyway to have Pro Power set to Off all the time?

 

[mleaky]

Is there anyway to have Pro Power set to Off all the time?

Pro Power should always be off unless you activate it from the dash button or the infotainment screen or plug something in the bed plug and push the green button.

 

[JDMCTR00]

Pro Power should always be off unless you activate it from the dash button or the infotainment screen or plug something in the bed plug and push the green button.

Mine turns on every time I start the truck. I have to manually go in and shut it off(2023).

 

[HORN HIGH ACES]

anyone know how to change the TPMS sensor thresholds? I've seen some posts on other forums for f250s... id love to change it such that i dont continually have the warning light pop up when my rear tires hit 29 psi or so overnight in the cold

Reviving this question. Has anyone done this??