GEN3 Forscan

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

shank_guru

Full Access Member
Joined
Sep 23, 2020
Posts
182
Reaction score
275
Location
Cape May, NJ
This thread is a BEAR - but reading the first 70-80 pages is important to figure what you want done for for your Gen 3.

My 2023 had all this done today:
Glare free - it really is amazing
Fogs on with high beams
DRL brightness to 75%
Double honk disabled
Door chime disabled
Lane change now 5 blinks
Front windows down and up via remote
Gauges show temps on the cluster
Heated wheel enabled
 

Antho

FRF Addict
Joined
Apr 12, 2019
Posts
2,023
Reaction score
2,598
Location
Texas
I took a PTO day and sent the Fam on a mini vacation to read all 119 pages and what a roller coaster. I went from not knowing what Glare Free was, to absolutely planning to make that change, to being gutted when I found out its not available on the 2024's. Assuming that is still the case, but hopeful that someone figures it out someday.
Nothing to figure out. It’s not in the 24 F150 HCM software.
 

HeightsAg

Member
Joined
Oct 27, 2022
Posts
8
Reaction score
19
Location
Houston, TX
Hey gents - New to the forums. I recently acquired a 2022 Raptor and would like to do some of these Forscan changes. Does anyone happen to be in Houston that could make these changes for me in exchange for a bottle of bourbon, etc.? Thanks.
 

Littlefx4

FRF Addict
Joined
Feb 11, 2017
Posts
3,008
Reaction score
2,730
Location
Texas
Hey gents - New to the forums. I recently acquired a 2022 Raptor and would like to do some of these Forscan changes. Does anyone happen to be in Houston that could make these changes for me in exchange for a bottle of bourbon, etc.? Thanks.
Not a proper 1st post…especially without pics. Start here…

 

ekalb

Full Access Member
Joined
Apr 13, 2023
Posts
144
Reaction score
202
Location
Cape Cod, Ma
I "helped" a buddy turn on DRL's and fogs on his 2024 Raptor back in August. I had him take photos of his as-built data BEFORE I made those changes. He now wants the fogs turned off, but of course deleted those photos of his original values. I know I can grab his entire as-built data online, but is there a way of just finding his initial values for these two entries below?

Screenshot 2024-10-30 at 9.01.08 AM.png
 
Top