GEN3 Forscan

[swoop1156]

I am seeking some help with my recent upgrades to my truck. I made several modifications, including adjusting the DRL brightness, enabling DRL + Bambi, DRL + Parking light, DRL + Foglight, and implementing Glare-Free functionality.

After making these changes, I was dissatisfied with all lights coming on during DRL mode. Consequently, I decided to revert everything to the stock settings and simply increase the brightness to 75%. However, I encountered an issue where the fog lights remained on while other lights, such as the 3 dot line, side markers, and rear lights, disappeared. Despite multiple attempts to restore the original settings, the fog lights persist.

Additionally, I attempted to correct an error in the Glare-Free setup last night by properly rebooting the APIM and reconfiguring the values. However, I now receive an error message stating "Check headlamp system. See manual." I am in need of assistance to resolve these issues. Thank you.

Regarding your fogs staying on as DRL, I'm seeing your 726-39-01 set as 02xx xxxx xxxx where I believe it should be 03. My AB data is 03. Apologies I didn't have time earlier in our PMs to go through this and look. I'll respond to you now, though. I think we need more info regarding what changes still persist pertaining to the Glare-Free setup.

 

[hanj0208]

Regarding your fogs staying on as DRL, I'm seeing your 726-39-01 set as 02xx xxxx xxxx where I believe it should be 03. My AB data is 03. Apologies I didn't have time earlier in our PMs to go through this and look. I'll respond to you now, though. I think we need more info regarding what changes still persist pertaining to the Glare-Free setup.

I always appreciate your assistance via PM. I managed to resolve the issue using the BCM option instead of the BCM AB. I located the fog light setting and changed the value to 3 (fog lights only). It appears that 02 is for (DRL+fog lights). Ultimately, they are the same thing whether through BCM AB or regular BCM.

I'm unsure if this has been previously mentioned. I referred to page #2, which indicates that I should modify 726-39-01 02xx xxxx xxxx, but the spreadsheet shows 726-38-02 00xx xxxx xxxx.

I have attached images.

 

[RaptorAU]

Does the auto start/stop disable work on the 23's as well? Gonna mess with Forscan tomorrow and just got in my 4DTech auto start/stop disabler that goes into the plug behind the glove box but might just use the forscan method instead

 

[swoop1156]

I'm unsure if this has been previously mentioned. I referred to page #2, which indicates that I should modify 726-39-01 02xx xxxx xxxx, but the spreadsheet shows 726-38-02 00xx xxxx xxxx.

Oh boy. I've used both the spreadsheet as well as what's on page 2 of this thread. I can hook my laptop up to the truck tomorrow and see what each value is on mine if you like. Hmm... I didn't modify settings with/without fogs as I have the triple RIGID set in there and don't use the factory lighting.

 

[hanj0208]

Oh boy. I've used both the spreadsheet as well as what's on page 2 of this thread. I can hook my laptop up to the truck tomorrow and see what each value is on mine if you like. Hmm... I didn't modify settings with/without fogs as I have the triple RIGID set in there and don't use the factory lighting.

You don't need to do that. I believe I solved the problem by inserting the "3" exactly as you instructed, and everything reverted to its original state.

 

[swoop1156]

Can anyone tell me (I know it's not necessarily the proper thread), but do the factory fog lights come on when using the zone lighting? I know the headlights do, though I don't have anything hooked into the factory fog switch. Thanks! Looking to maybe change up my lighting setup.

 

[awd5906]

Can anyone tell me (I know it's not necessarily the proper thread), but do the factory fog lights come on when using the zone lighting? I know the headlights do, though I don't have anything hooked into the factory fog switch. Thanks! Looking to maybe change up my lighting setup.

Yes they do.

 

[tm965]

anyone know how to change the TPMS sensor thresholds? I've seen some posts on other forums for f250s... id love to change it such that i dont continually have the warning light pop up when my rear tires hit 29 psi or so overnight in the cold

 

[swoop1156]

Yes they do.

I was thinkin' so, much appreciated!

 

[RaptorAU]

Laptop should be here shortly from UPS. I can't wait to dive in and get some changed. That double honk is getting punted to the moon.