GEN3 Forscan

[swoop1156]

Did the glare-free mod today when the truck got delivered. Never drove it in the dark without the mod. Turned it off through touchscreen on and off a few times down the main but country road. Definitely a huge difference! Thanks to all on the forum for making it possible for my smooth brain to understand.

 

[whitelye]

Has anyone re-captured all of the updates / changes into a new excel? Would make it much easier vs shifting through 54 pages.

 

[Antho]

Has anyone re-captured all of the updates / changes into a new excel? Would make it much easier vs shifting through 54 pages.

@whitelye
livnitup keeps the f150 sheets updated.

https://docs.google.com/spreadsheets/u/0/d/1-_e09lLPPeSHoO3SsNwyqu5v3dgpbluvJcezUItTSVI/htmlview#gid=1697316526

 

[JoeMoe]

My last OTA update was from October of last year. Mine is a 21' I picked up in early September of 2021.

Sorry to get the main topic of this thread off track a bit. Wasn't my intention.

I had the same problem. Called Ford (833)389-0848. Told them I've not received any updates. They did some testing while on the phone in the truck. Confirmed there was an issue and started a case. TSB-22-2404 was the problem. Took it to the dealership and they updated a module and then got all updates. NO CHARGE.
Hope this helps.

 

[Wichadicha]

Ok, I might be slow on this one but what is the welcome chime called. The one when you get in the truck and push the ignition? Really want to shut that one off. Also wouldn't mind the chime for when you're in gear (not in park) and open the door. Please no flaming on that one

 

[Sparda1123]

Alright so maybe I missed it but I've read through the thread, searched and went thru trying different values from the sheet with no luck. Anyone have the values for oil temp and trans temp under the gauges at the top of the cluster? I can see it by going to the measurements page but I saw a few folks mention they've got it working at the top without sharing what values they changed to do so.

 

[Chop96]

Alright so maybe I missed it but I've read through the thread, searched and went thru trying different values from the sheet with no luck. Anyone have the values for oil temp and trans temp under the gauges at the top of the cluster? I can see it by going to the measurements page but I saw a few folks mention they've got it working at the top without sharing what values they changed to do so.

Here you go:

Enable digital temps for engine & transmission on 12" digital cluster only IPC 720-07-01 xxxx x**x xx-- E5

I'd love one for oil pressure so there's numbers across all four... anyone have that?

 

[MattR]

Has anyone found a Forscan setting to change the amount of time before the alarm for "place hands on wheel" when in cruise control?

I will have my hands on the wheel and it still alarms, over and over, to the point that I usually don't use the lane assist

 

[Bubbasuwannee]

Has anyone found a Forscan setting to change the amount of time before the alarm for "place hands on wheel" when in cruise control?

I will have my hands on the wheel and it still alarms, over and over, to the point that I usually don't use the lane assist

That's actually a great idea. That gets so annoying on long trips.

 

[Antho]

Has anyone found a Forscan setting to change the amount of time before the alarm for "place hands on wheel" when in cruise control?

I will have my hands on the wheel and it still alarms, over and over, to the point that I usually don't use the lane assist

No. Its not configurable. If it was, everyone would just turn it off. LOL