GEN 3 Official Aftermarket Wheels Thread

[Chilly_Chaz]

I want to upgrade the wheels/tires on my 25, 37PP (hate the OEM wheels).

I've spent hours on this thread, it's very helpful. I live in the mtns of CO and need a good snow/ice tire.

My options are limited to the MT Baja Boss AT, Open Country, or Wildpeak. I'm leaning towards the Baja Boss A/T.

I want Vossen Hf6-4 20x10, w -18 Offset. Will pair this with 37x12.50x20 Baja Boss. Also, will have the Eibach springs (2.25" front, & 1" rear) installed.

With the new, modular bumper, does anyone know how much trimming will be needed to make this work? Thank you in advance!

 

[BaseModelRaptor]

I want to upgrade the wheels/tires on my 25, 37PP (hate the OEM wheels).

I've spent hours on this thread, it's very helpful. I live in the mtns of CO and need a good snow/ice tire.

My options are limited to the MT Baja Boss AT, Open Country, or Wildpeak. I'm leaning towards the Baja Boss A/T.

I want Vossen Hf6-4 20x10, w -18 Offset. Will pair this with 37x12.50x20 Baja Boss. Also, will have the Eibach springs (2.25" front, & 1" rear) installed.

With the new, modular bumper, does anyone know how much trimming will be needed to make this work? Thank you in advance!

Brodozer incoming.

 

[KustomAF]

I like it, I was between this and the SDI solution for leveling. SVC was recommended by the shop i used so i just went with it.

Ride is a little stiffer up front, but i am really happy with the height.

What shop did you use and how much did it cost if you don’t mind telling?
So Cal Super Trucks in San Bernardino insisted on the SVC collars when I asked about the SDI top hats. They quoted me $700 installed and aligned OTD.

 

[Rybread]

My wheels finally showed up today, so I immediately took my truck to a local tire shop and had them installed.
17x8.5 +0 offset

 

[BahaBlastediam]

Nate,
Not a good picture….but here are your wheels on a Space White. I will try to take some better ones soon.

Amazing how much lighter your wheels are vs stock 802 wheels.

View attachment 483678View attachment 483679

Any issues with the 0 offset in the stock tires? First 802 I’ve seen running both stock tires with a 0 offset wheel. Trying see if I’ll need a level

 

[kirkb]

Any issues with the 0 offset in the stock tires? First 802 I’ve seen running both stock tires with a 0 offset wheel. Trying see if I’ll need a level

I am not OP, but I have 0 offset wheels on stock tires, no rubbing and no issues (even with heavy off-roading). I think most all of the trucks you see on Method wheels are running 0 offset because that is all they offered in Raptor fitment for a long time (may have other options now). They do poke a little more than stock however and will throw more mud, dirt, water on the sides of the truck.