Gen 2 Sunroof

[wes127]

Having issues with my sunroof on my 2018. It’s been going on for a while and it’s just getting worse. I’ve watched countless videos on cleaning the rubber and lubing everything. still driving down the road, it creeks and rattles non stop.
Anyone know of a fix? Ive taken it to the dealer and they have no clue what to do. It opens and closes fine. Just rattles like crazy.

 

[goblues38]

when mine starts to "rattle". I move it to the vent position, then close it again. That appears to take out all the slack of the gears in the tracks and reseats the glass. Rattles go away for a few days or weeks each time I do it.

I do the lube thing every spring and fall.

 

[Shane361]

Man these post scare me. I didn't want this damn roof but here I am. This stereo I'm installing tomorrow is gonna play hell on the roof. Good Luck Man!

 

[wes127]

when mine starts to "rattle". I move it to the vent position, then close it again. That appears to take out all the slack of the gears in the tracks and reseats the glass. Rattles go away for a few days or weeks each time I do it.

I do the lube thing every spring and fall.

I did the same for the first 2 years now it does it all the time. Drives me nuts!

 

[FordTechOne]

Having issues with my sunroof on my 2018. It’s been going on for a while and it’s just getting worse. I’ve watched countless videos on cleaning the rubber and lubing everything. still driving down the road, it creeks and rattles non stop.
Anyone know of a fix? Ive taken it to the dealer and they have no clue what to do. It opens and closes fine. Just rattles like crazy.

Are you using the specified Krytox grease? That’s very important.

 

[wes127]

Are you using the specified Krytox grease? That’s very important.

Yes sir gpl 105

 

[JefferyGT]

Would running the open close learning procedure possibly recalibrate the limit settings and reseat the panels?

 

[GCATX]

If you haven't already, you gotta lube the rear fixed glass gasket also.

 

[wes127]

Would running the open close learning procedure possibly recalibrate the limit settings and reseat the panels?

Good idea. How do you go about doing that?

 

[EastEndAngler]

I just cracked 20,000miles. I've done the procedure at least a half dozen times. It's usually because I can't stand the noise anymore. Rather amazed how how quiet things become. Take your time cleaning/ use the right p/n's.