GEN 2 Gen 2 pro eagle jack no drill bed mounting plate

[Booth9999]

Standard 2 ton jack mount here. I haven’t mounted it yet I hope it fits, I’m going to be getting it done next month is my plan.

 

[87sheerips]

loosen the front screws - you should be able to thread all 4.

You ordered a big wheel kit and it mounted perfect? Let me know. Thanks.

 

[nikhsub1]

You ordered a big wheel kit and it mounted perfect? Let me know. Thanks.

Yessir - I mounted the bracket under my bed rug.




Sent from my iPhone using Tapatalk Pro

 

[87sheerips]

Yessir - I mounted the bracket under my bed rug.




Sent from my iPhone using Tapatalk Pro

Amazing!

 

[Quiker]

Any tips on bed bolt removal and replacement on a 2017? Is it torx 50 plus? Will I have to replace the bolt or can it be re-used?

Hey guys - I'm just doing this - Is it s T50? I have the spray in bed liner - so not sure if it's not a T50 or if the liner in the bolt head is giving me grief.

 

[Huck]

Hey guys - I'm just doing this - Is it s T50? I have the spray in bed liner - so not sure if it's not a T50 or if the liner in the bolt head is giving me grief.

It’s a Torx plus size. If you use a T50 be real careful, it’ll strip


Sent from my iPhone using Tapatalk

 

[87sheerips]

Check out our new low-pro D rings!
https://www.jdscustoms.com/product/low-pro-bed-mounted-d-ring-strap-hooks-new/

 

[Booth9999]

What is everyone doing with the pro eagle handle and jack extension? Am I the only one who thinks it is wired that the mount made by pro eagle does not have a builtin solutions? I find it weird that they sell the mount but no where for the stuff that comes with the jack. Any ideas would be helpful, I’m thinking build right bed rack but honestly I don’t care for it that much.

 

[Quiker]

The big wheel had a place to store the handles underneath the jack itself - and a did put the extension on the racking

 

[87sheerips]

The big wheel had a place to store the handles underneath theView attachment 113340 jack itself - and a did put the extension on the racking

Nice setup, are you running our jack plate and rotopax mount?