Geisers, Icons, and 37s

[Wfo]

So without having to scroll and read everything why are you selling the geisers? I'm about to install a pair, I too I'm going to run a 37-inch setup therefore I could not use the eibach as it was not enough lift, I'm going with the icon rear Leafs and I will use option 2

Sent from my SM-N950U using Tapatalk

The eibachs I ordered and sold my friend are about the same height as the Geisers white is Geisers AG is eibachs

 

[mp_tx]

I am aware of Trident but could you provide more info or link to the tint shop? Thanks.


Sent from my iPad using Tapatalk

 

[FerdFteen]

So without having to scroll and read everything why are you selling the geisers? I'm about to install a pair, I too I'm going to run a 37-inch setup therefore I could not use the eibach as it was not enough lift, I'm going with the icon rear Leafs and I will use option 2

Sent from my SM-N950U using Tapatalk

I wanted to try the 2019 eibachs with 1.7 versus 2.5 (I think those are ballpark correct) lift, but ended up going with the regular eibachs to clear my tires. I have no rubbing without trimming anything.

Geisers were great but rode a little too high for me and were a little still stiff. Got the truck last night and this setup with deavers and eibachs feels the best to me so far.

Icon stage 2 will leave you with some rake unless your have extra weight in the bed - is that what you're going for?

Good luck with your build!

 

[FerdFteen]

I am aware of Trident but could you provide more info or link to the tint shop? Thanks.


Sent from my iPad using Tapatalk

@mp_tx I get all my work done at authentic details in Pflugerville. They've done a few vehicles for me and did the PPF, ceramic coat, and tint on this truck. Ask to talk to Brad (the owner) and tell him Adam sent you over.

Trident also has a shop they use for tint, PPF, etc., But I can't recall the name. I spoke with the owner and would've used him if I didn't have a previous relationship with Authentic.

I'm on my phone so it's hard to see - are you in the Austin area?

 

[0-60 freak]

I wanted to try the 2019 eibachs with 1.7 versus 2.5 (I think those are ballpark correct) lift, but ended up going with the regular eibachs to clear my tires. I have no rubbing without trimming anything.

Geisers were great but rode a little too high for me and were a little still stiff. Got the truck last night and this setup with deavers and eibachs feels the best to me so far.

Icon stage 2 will leave you with some rake unless your have extra weight in the bed - is that what you're going for?

Good luck with your build!

Thank you for the reply, that sounds like a great set-up, my Geiser Springs are already in route so I'm just going to try that method first, if I did my calculations right I should end up with a half inch forward rake which is perfectly fine to me my last 2018 truck always appeared to have a reverse rake from time to time and it always bug me I am going to be running 37 by 12.5 by 20s and hopefully I will not have any rubbing issues and only have to trim minimal on the inner Fender plastic liner. Please post a picture of your setup with your 37's I would love to see it

Sent from my SM-N950U using Tapatalk

 

[mp_tx]

@mp_tx I get all my work done at authentic details in Pflugerville. They've done a few vehicles for me and did the PPF, ceramic coat, and tint on this truck. Ask to talk to Brad (the owner) and tell him Adam sent you over.

Trident also has a shop they use for tint, PPF, etc., But I can't recall the name. I spoke with the owner and would've used him if I didn't have a previous relationship with Authentic.

I'm on my phone so it's hard to see - are you in the Austin area?

I am in Austin. Actually just stopped by Trident yesterday, but failed to ask about tint.


Sent from my iPhone using Tapatalk

 

[FerdFteen]

Cool - what are you planning to do to your truck?

 

[FerdFteen]

Thank you for the reply, that sounds like a great set-up, my Geiser Springs are already in route so I'm just going to try that method first, if I did my calculations right I should end up with a half inch forward rake which is perfectly fine to me my last 2018 truck always appeared to have a reverse rake from time to time and it always bug me I am going to be running 37 by 12.5 by 20s and hopefully I will not have any rubbing issues and only have to trim minimal on the inner Fender plastic liner. Please post a picture of your setup with your 37's I would love to see it

Sent from my SM-N950U using Tapatalk

@0-60 freak it sits just slightly lower than the Geiser/Icon setup. I'll try to grab a couple pictures and fender measurements this weekend.

What offset wheel are you running, and what tire?

 

[0-60 freak]

@0-60 freak it sits just slightly lower than the Geiser/Icon setup. I'll try to grab a couple pictures and fender measurements this weekend.

What offset wheel are you running, and what tire?

Venomrex 602 et12 I think and 37x12.5x20 ridge grappler

Sent from my SM-N950U using Tapatalk

 

[0-60 freak]

Recieved my springs, now debating on powdercoating them red or blue along with tow hooks

Sent from my SM-N950U using Tapatalk