GEN 2 Full Race Turbo upgrade (January 2018 Release)

[RMB_Ryan]

Wow, arent trucks pushing 600 ft/lbs with a good tune and bolt ons?

600 with 500 miles


Also ford was and still is having head gasket issues. They just made a major change to them and we still see them going. We have custom head gaskets made. If ford made a huge change to their design tells you something




Sent from my iPhone using Tapatalk

 

[Fender]

Is that with 600 whp / wtq ? Or crank numbers?
This makes a huge difference lol

 

[RMB_Ryan]

Is that with 600 whp / wtq ? Or crank numbers?
This makes a huge difference lol

We only use crank numbers or engine numbers when we run the engine dyno


Sent from my iPhone using Tapatalk

 

[Truckasaurus]

Full Race EFR kit on 62/58 turbo options. Turbos are maxed out flowing over 90 lb/min, running only 6 degrees of timing and 20 psi.

Also, the engine is one of our 4.2l strokers, cams, heads done, basically it’s our pretty much nicest optioned engine package. We do this to spool 71/63’s to make full boost by 3000 rpm thru 7600 rpm. That’s white knuckling that wheel at 875 whp let alone over 1000 on 37’s. Coolant spooling and rad, strokers are overachieving our original design and numbers we were targeting by about 8-10% which I’m stoked with.

I’ll also note the last graph is the same kit on another truck that’s stock engine and with another tuner.
We also since switched to the efr 71:63’s and are good for over 1000whp when Trans gets back in from being built.

Notice the curve not just HP difference on the stroker vs stock.

Also note this is the bone stock fuel system so we were stretching it at this point.


[/IMG]

Is this on pump gas?

Impressive, regardless. You have really extended the power band. The Ecoboost isn't known to want to rev. You must have done a fair bit of head work? Are the valves stock?

 

[RMB_Ryan]

Is this on pump gas?

Impressive, regardless. You have really extended the power band. The Ecoboost isn't known to want to rev. You must have done a fair bit of head work? Are the valves stock?

Pump to the wheels