Full race FMIC on gen 3 installed!

[thatJeepguy]

Correct. It is bolted inside on the left side (driver side) of the factory bumper.

So correct no need to relocate or correct yes relocate ?

 

[Nex]

No need to relocate if not changing the bumper.

 

[WTX]

So correct no need to relocate or correct yes relocate ?

No need to relocate. No need to even take the bumper off during install. Very simple install

 

[562gen3]

On the Gen 3 you do not even have to remove it from bumper as bolts are on backside of bumper. I had to have my Gen 2 ACC recalibrated, but my Gen 3 was fine. I dont think you technically need to remove bumper for just intercooler but I also did winch.

how did you have to modify the acc bracket? i’m looking to install soon and want to make sure i get it right

 

[James O]

how did you have to modify the acc bracket? i’m looking to install soon and want to make sure i get it right

The ACC is in the front bumper on driver side. I did not have to remove it from bumper and it has been working fine.
I did save my relocation bracket in case I buy the ADD the Stealth bumper later on.
I dont think the bumper has to come off if your just doing intercooler.

 

[8250_RPM]

the full race relocation bracket is not a perfect fit for the gen3 adaptive cruise, if you’re having to use it. I had to modify mine to get everything to fit.

Also, i purchased the recirculating hose that full race recommends for the gen2, cut a couple inches off it to make it fit my gen3.
View attachment 377184

Which bumper is this?

 

[8250_RPM]

Almost tore into the front to install a Cobb intercooler this weekend which looks a lot like the Full Race IC. Gotta say, looks pretty daunting. I’m pretty sure I’ll break something and not even know it. The Cobb instructions are very detailed but can’t identify the parts in the pictures…thinking of paying a shop to do it. Am I overthinking it? I usually handle all basic maintenance items myself.

 

[FmaxTurboSi]

Which bumper is this?

ADD offroad

2021-2024 Ford F-150 Raptor ADD PRO Frame Cut Front Bumper

Our ADD Pro Frame Cut F-150 Raptor Front Bumper maximizes your approach angle, and does it with a clean and refined style. It closely follows the body contours of the front-end, and prepares your Raptor for high speed desert adventures. Made in America and Free Shipping!

www.addictivedesertdesigns.com

 

[8250_RPM]

ADD offroad

2021-2024 Ford F-150 Raptor ADD PRO Frame Cut Front Bumper

Our ADD Pro Frame Cut F-150 Raptor Front Bumper maximizes your approach angle, and does it with a clean and refined style. It closely follows the body contours of the front-end, and prepares your Raptor for high speed desert adventures. Made in America and Free Shipping!

www.addictivedesertdesigns.com

Was install pretty straightforward? I was initially thinking SVC Smurf or Evil Hellion. No instructions on the Smurf but they do have a video on the Gen 2 Rap on their website. The Evil instructions appear to be well done but can’t really get an idea on how it looks via the several online pics and videos I’ve seen. I like simple in terms of aesthetics.

 

[FmaxTurboSi]

Was install pretty straightforward? I was initially thinking SVC Smurf or Evil Hellion. No instructions on the Smurf but they do have a video on the Gen 2 Rap on their website. The Evil instructions appear to be well done but can’t really get an idea on how it looks via the several online pics and videos I’ve seen. I like simple in terms of aesthetics.

installation isn't difficult if you're a fairly handy guy and have tools to get the job done. Just take your time, measure twice, and cut once. I think I used a 12" sawzal blade intended to cut metal. I can't remember the exact size of the largest nut and bolt that holds the bumper bracket into the frame horns. But you definitely need a large crescent wrench and large socket to get that torqued down. Rubber mallet comes in hand also.