FS: C4Fabworks jack extension

[Deleted member 12951]

Thanks Rick. That would be great.
If it's simply drilling the hole larger, I'll probably take it.

Joe, here is his response:

Todd Gruner <[email protected]>

It should be the same size hole but HF has been changing there jacks recently and I haven't confirmed if the new model # 3 ton jack would work with your spacer (it used to).

Sent from my iPad

On Feb 9, 2016, at 8:44 PM, "[email protected]"
Todd,
Hope have a quick question, if I want to move this over to a Harbor Freight 3 ton aluminum, do I just need to drill out the hole bigger?
Thanks, Rick

 

[bigred1097]

Joe, here is his response: Todd Gruner <[email protected]> It should be the same size hole but HF has been changing there jacks recently and I haven't confirmed if the new model # 3 ton jack would work with your spacer (it used to). Sent from my iPad On Feb 9, 2016, at 8:44 PM, "[email protected]" Todd, Hope have a quick question, if I want to move this over to a Harbor Freight 3 ton aluminum, do I just need to drill out the hole bigger? Thanks, Rick

Hey guy I'll let you know that the hole will have to be drilled out I run the HF 3 ton aluminum and the extension The only way the extension will work is to drill it out

 

[Yukon Joe]

Well heck, I got a drill!
@RDFTS,
thanks for looking into it. Looks like it's an easy mod to make it fit.

What caused the damage?

Vote for your favorite pic
http://www.fordraptorforum.com/f18/january-2017-calendar-vote-46906/
@Yukon Joe
Delta Lead
www.runraptorrun.com

 

[Deleted member 12951]

Well heck, I got a drill!
@RDFTS,
thanks for looking into it. Looks like it's an easy mod to make it fit.

What caused the damage?

Don't recall when it actually happened but imagine it happened when I was jacking up my truck in the dark and I just wanted to get the tire changed on the trail and didn't pay close attention to placement at the time.

 

[Yukon Joe]

Copy....

One more question.
Can you slide your jack under the front cross member with the extension?

PayPal gift work for payment?

Vote for your favorite pic
http://www.fordraptorforum.com/f18/january-2017-calendar-vote-46906/
@Yukon Joe
Delta Lead
www.runraptorrun.com

 

[NE Ford]

@Yukon Joe, did you end up buying this? I'd like to be next in line if it's still available.

 

[Deleted member 12951]

@Yukon Joe, did you end up buying this? I'd like to be next in line if it's still available.

Joe has not sent me any money but then again I haven't provided him any pictures to his last question yet. Got home real late yesterday (14hr day) and been working all day today. Finishing up the day and when I get home, I will put it on both my jacks and post some pics.

 

[Deleted member 12951]

Copy....

One more question.
Can you slide your jack under the front cross member with the extension?

PayPal gift work for payment?

Here are your pics. I just put the extension on top of the pad, you will be removing the pad and the extension replaces it. I knew it would as I've used it before but that was with my 2 ton.



Then I put a piece of wood on top and it still clears



Pic of the jack I used, wheels still attached



And here is the last email from Todd but I just took a pic of the bottom. You won't be drilling out that much so not sure what he is taking about.

From: Todd Gruner <[email protected]>
Date: February 11, 2016 at 9:47:08 AM CST
To: "Rick F (RDFTS)" <[email protected]>
Subject: Re: Order number 186 received

You could drill it out bigger but I wouldn't recommend it. If the hole got any bigger then there wouldn't be a lot of meat left on the spacer for the bolt to engage.

Sent from my iPad

On Feb 10, 2016, at 8:42 AM, Rick F (RDFTS) <[email protected]> wrote:

But if not, just need to drill it out if needed to be bigger? I haven't gotten the jack yet so can't visually see them together yet.

 

[madmex]

This still up for sale?

 

[Deleted member 12951]

This still up for sale?

Yes.

No one has sent me a serious PM, just a bunch of questions. This is designed from C4 to work with the Harbor Freight 2 ton Aluminum jack. I take no responsibility if someone has to modify it to work on a different jack.

Money talks and yes, I take paypal.