Front slightly higher than rear after new shocks/midperch

[Jferrante]

Just installed newly rebuilt shocks set to mid perch and my front is sitting about an inch higher than the rear.....not really sure if its supposed to settle or what. Springs are seated correctly the rear doesn't have shackles or anything.
Any thoughts?

Sent from my SM-N975U using Tapatalk

 

[letsgetthisdone]

That looks like top perch height in the front.

Take a pic of the lower spring perch. Should have one groove showing below it.

 

[Jferrante]

That looks like top perch height in the front.

Take a pic of the lower spring perch. Should have one groove showing below it.

Its mid perch I checked and these came from TSW already on mid perch

Sent from my SM-N975U using Tapatalk

 

[MTF]

If your running stock rear springs it's time to upgrade to Deavers or Icons.
They are such an improvement over the stock rear springs in every aspect in ride quality.

 

[Jferrante]

More pics. Rear is about a half inch lower.

Sent from my SM-N975U using Tapatalk

 

[Nesc204]

My Gen 1 is mid Perch and my back is about 2 inches higher than the front. Maybe you're rear suspension needs serviced

 

[SS308]

It's Deaver time...

 

[Jferrante]

It's Deaver time...

Haha I'm not against that but scratching my head...was there even leveling kits for the gen1? I wasn't looking for it when I changed the shocks so may have missed it but doesn't look like it from what I can tell. Only other guess I would have

Sent from my SM-N975U using Tapatalk

 

[MTF]

I have a picture somewhere showing stock rear springs make 44 3/8" where your showing 43"
Something is off, take a picture of the rear shackle, someone may have added a longer (drop down shackle).

 

[Jferrante]

I have a picture somewhere showing stock rear springs make 44 3/8" where your showing 43"
Something is off, take a picture of the rear shackle, someone may have added a longer (drop down shackle).

Looked like stock bolts to me so didn't notice anything

Sent from my SM-N975U using Tapatalk