Forscan mod on the 24 models.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
GEN3LV

GEN3LV

Full Access Member
Joined
Mar 1, 2015
Posts
217
Reaction score
279
Location
Las Vegas
I just did the 3 Amber grill marker lights with the DLR so here is what my 24 had and what I did.

Modified line 726-38-01 and line 726-87-01 as per the below chart.
Line 726-43-02 was exactly like the chart already and I did not have to modify it at all just 2 lines of the 3. Anyone have the same coding in there 24.

The lights work perfectly with the DLR now.

1725799850814.png
 

RaptorFun

Full Access Member
Joined
Sep 25, 2018
Posts
550
Reaction score
482
Location
Northeast Wisconsin
Nope…it doesn’t. What @Antho posted above is correct. All of the marker lights illuminate…including the ones in the third brake light…the taillights and even the license plate LEDs. Hope this helps!
 

automoto

Member
Joined
Nov 4, 2019
Posts
24
Reaction score
6
Location
New Jersey
Recently did a couple forscan changes on my 24', inc. marker lights as LEDs, start stop, bambi mode etc. Now i'm noticing the performance screen randomly pops up or will automatically load once I start the truck and I did not have it selected. Also those little rectangular tabs next to the screen selection as you cycle through them are gone. Driving the other day none of the lights were on when the headlight switch was in the auto position. Its weird little crap, but has anyone else had this issue?
 
Top