Forscan changes - tweak your truck

[dreilly36]

Anyone here in Utah County, UT that could help me out with some forscan stuff?

 

[mikeyj67]

I'm in Sandy...I sent you a message Monday.

 

[JasonVoorhees]

If anyone around the Indianapolis area needs some Forscan changes, let me know. I'm happy to help!

Up in Fort Wayne, I sent ya a message.

Sent from my SM-N960U using Tapatalk

 

[Fordgasmz]

Up in Fort Wayne, I sent ya a message.

Sent from my SM-N960U using Tapatalk

I'm going to be doing my truck later this week. I'm here in Ft Wayne as well.

 

[PupDawg]

Has anyone tried successfully to get the Auto Relock enable to work on their truck? I hate worrying over whether I have locked my truck...

Also curious about the interior alarm disable and disabling the ignition shut off, we travel frequently and keep our dogs in the truck for short stops, would like to be able to keep the truck running when we stop to eat or even leave the sunroof open and shut the truck off without having to remember to disable interior alarm. I have seen the changes necessary but wanted to know if they are actually working correctly.

 

[Wfo]

Anyone have codes to change tpms down to 20lbs?

 

[DrewFish11]

Anyone have codes to change tpms down to 20lbs?

On my 2018, the lowest it would accept and show as “specified” is 25. You just convert code line to the hexadecimal equivalent.


Sent from my iPhone using Tapatalk

 

[Wfo]

On my 2018, the lowest it would accept and show as “specified” is 25. You just convert code line to the hexadecimal equivalent.


Sent from my iPhone using Tapatalk

Thank you for the response! Did you try to go lower than 25? I’m on 37s with method beadlocks so I can go low.

 

[rtmozingo]

The setting is for what the placard states - ie what on-road cold psi you run. Should be in the ballpark of 30-36psi. The low indicator comes on at a PSI below that. For a setting of 38 that seemed to be around 28-30 psi in my truck, so perhaps 10 lower than setting?

 

[Wfo]

The setting is for what the placard states - ie what on-road cold psi you run. Should be in the ballpark of 30-36psi. The low indicator comes on at a PSI below that. For a setting of 38 that seemed to be around 28-30 psi in my truck, so perhaps 10 lower than setting?

Sure would like a confirmation on this theory.