Ford Raptor Fuel Pump Fuse Issue

[gwpfan]

Yesterday mine wouldn't start...weak battery, probably need to replace. Jumped in the new one.

Checked fuse 27 since I was under the hood this morning to recondition the battery. Right it's showing fine, but only have like 15K on it. Will order the kit and just do it.

 

[saylsworth]

Just picked up a 2014 screw with 23k mi on it... happy i joined this forum as i would have been lost on my own

 

[engine45]

I just did the fuse27 relocation myself today . took about a hot hour here in the satans ******* (south florida). truck cranked right up. now I just have to figure out how to reset my damn clock on the navi.

 

[Colemanater]

This just happened to me yesterday while doing 70+ on a mountain highway during afternoon traffic. Not fun!! I wish I would have seen this sooner. I already gave the dealer a green light to do the repair ($300). It's BS that this wasn't a recall. I have filed a complaint as suggested.

Wow that sounds very familiar....there should be a lawsuit.....

 

[BenBB]

Did mine as preventative maintenance/upgrade this weekend, looks like the factory fuse had been replaced once with a minifuse by a previous owner but the socket isn't melted much if at all. Ordered mine online from Livermore Ford with some other random bolts I needed (good prices and online parts book). Appreciate all the posts, the aluminum foil really helped as I did drop some solder, also I was outside with a cheapy soldering iron and was able to curl the foil to keep the iron hot even in a breeze. Got a nice gash in the knuckle trying to turn the fusebox so I could see underneath, found a rough casting on the bracket that was pretty damn sharp. Managed to melt a plastic bracket with the soldering iron but not too bad.

 

[andreb]

Got a nice gash in the knuckle trying to turn the fusebox so I could see underneath, found a rough casting on the bracket that was pretty damn sharp.

That casting is really poorly finished. I couldn't stand to put it back in that way so I smoothed out all the casting marks and sanded down the flashing with a band file and sanding disk on die grinder. I sprayed it with Plasti Dip and it came out really nice

 

[ineedaBubble]

So, does anyone have the actual instructions from the fuse 27 relocation kit? I saw someone mention that they're in the FRF FB group, but I can only look through so many posts involving 'fuse 27'.

I've also searched here on FRF, but can't seem to find anything other than the TSB.

 

[xtela]

I have it in .pdf. At 1.75mb it is to big for me to attach here. If you pm me an email address I will send it there.

 

[ineedaBubble]

I have it in .pdf. At 1.75mb it is to big for me to attach here. If you pm me an email address I will send it there.

PM’d ya


Sent from my iPhone using Tapatalk

 

[scootr2200]

Im will revive this a bit as I have a question for some..

For those with the Ford ESP, have you successfully had this TSB performed and had it covered by the warranty?

I just left my dealer and they were certain that if I had this performed “as a precaution” that the ESP would not pick up the tab.

I have not had a chance to look at the condition of the fuse yet but that will be done today.

Mickey