Icecobra
FRF Addict
I have read a couple threads about Fire extinguisher installs. I wanted a place to be accessibly from the drivers seat and front passenger without opening doors. Sometimes in a fire seconds count so I wanted it close by. I was sure with pedals etc. driver side would be a tough sell.. So I worked on the passenger side I came up with this. I removed the trim piece on the side of the center console forward and looked behind. Ok enough room for a metal plate and if positioned correctly it would clear everything and be out of the way of anything my wife would do. It is reachable form driver side and I tighten everything down so I don’t have any rattles. Pet peeve of mine rattles. So I put a small piece of foam directly behind the extinguisher at its contact points to avoid noise. I used a flat piece of aluminum plate on the backside and used nuts and bolts to hold it on... I have to go off road to declare it a success but have to wait until a free weekend to do that... So far here are a couple pictures….