GEN 1 E rated tire PSI

[oplersx]

Just wondering what psi are you guys running on E rated tires? Switched From OEM KO (c rated?) to Toyo AT III (E rated). At 40 PSI, Fox 3.0 on full soft setting, still feels like 100% stiffer than old KO, lol...

 

[GCATX]

Good luck. I went from stock C's on my 2018 to some E's and I had to run down in the high 20's psi to get a comparable ride, then the tires were kinda squirmy. I am pretty picky about a comfortable ride though. Swapped them out for another set of stock tires. Play with the PSI, maybe you will hit on something that works.

 

[MTF]

Gen 1's never had Class C as an OEM tire.
They were D's and then E's
C's are the OEM for Gen 2

I run 38 front and 34 rear on E's KO2s
36 front and 32 rear if truck is empty.

 

[Irregular F150]

Gen 1's never had Class C as an OEM tire.
They were D's and then E's
C's are the OEM for Gen 2

I run 38 front and 34 rear on E's KO2s
36 front and 32 rear if truck is empty.

36/32 make a difference in driving etc?

Mine were set at 35/35 when i got it so thats where i left them.

 

[MTF]

I like 38 in the front more then 36 because it makes parallel parking easier with one hand.
36 in the front is good for long trips for me.
32 in the rear seems to be the sweet spot between softness and tire not rolling over the rim.
But I usually have weight in my truck so 34 is what I run most of the time.

 

[Irregular F150]

Gotcha. I dont haul much if at all and parallel park in the sticks lol. so im gonna try out 36/32 area and see how it goes.

 

[oplersx]

Ok, off to test 38/38

 

[Steven_Born]

@MTF did you have to adjust the settings on the computer to make it where you did not get a low pressure reading from the TPMS with these pressures. If so did you use a ForScan and do you remember where to navigate to for this?

 

[MTF]

@MTF did you have to adjust the settings on the computer to make it where you did not get a low pressure reading from the TPMS with these pressures. If so did you use a ForScan and do you remember where to navigate to for this?

Yes, I have a Tune with the SCT handheld device to adjust the threshold.
I do not use Forscan, sorry

 

[Steven_Born]

MTF, no issues at all, I plan to install a SCT tuner I just wanted to make sure.