Do you leave your upfitter switches on all the time?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

NASSTY

FRF Addict
Joined
Aug 19, 2016
Posts
2,584
Reaction score
3,067
Location
ME
Very interested in the same look. What is your exact set up in regards to light positions and how you did such a nice job with the modded lens on the BD’s
Thanks!


HAPPILY EVER RAPTOR
I put a couple layers of 5% wiindow tint on the inside of the Rigid amber covers. I recently replaced my KC Hilites with BD S1's that have amber lenses. The amber BD's were too bright for street use so I took the amber lenses from the KC's which have a layer of 5% tint on the inside and put those on top of the BD's.
The Rigid amber covers just snap on and off.

RIGIDpolycarbonateCOVER-003-750x563.jpg
 

dilmorecg

Full Access Member
Joined
Jan 8, 2019
Posts
127
Reaction score
52
Location
Seattle, WA
I have BD sport fogs with yellow S2s and I leave those on usually 80% of the time. The others are too bright for the road so I only flip them on occasionally when no ones around.
 

FoShizzle

Active Member
Joined
Apr 10, 2018
Posts
70
Reaction score
60
My uplifted light switches are off 99% of the time. I only turn them on when I need extra light and not just for looks. I’ve seen guys run them during the day, but it just seems cheesy to me.
 

IDontDoUrban

Full Access Member
Joined
Aug 12, 2018
Posts
135
Reaction score
123
Location
TX
I keep the amber lights on the BD behind the grill S8 running all the time. I only use the rest when needed on road or off-road.
 

pbtjrlmrt

Full Access Member
Joined
Feb 21, 2019
Posts
560
Reaction score
459
Location
Oregon
Say for fog or driving lights. Or do you only cut them on at night?

No I don't leave them on all the time. I connected the bumper lights to my high beam so they are automatic. I also connected them to switch 1 so I can use them any time I want. I connected my rear lights to my reverse lights so they are automatic...I also connected them to switch #2 so I can use em as trail/follow lights.
 

amREADY

Full Access Member
Joined
Aug 24, 2019
Posts
357
Reaction score
318
Location
Victoria, BC
Hell i get flashed with just the headlights on.

Me too. Mine were adjusted very high from the factory. I have them almost all the way down for around town, but if I was doing a trip or more time on gravel would adjust them up a bit. The adjuster was a bit sticky at first and didn't feel particularly burly. I worked it back and forth and just took my time. It loosened up a bit.
 
Top