DIY stereo upgrade for under $500.00

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

dhmcfadin

Full Access Member
Joined
Mar 27, 2018
Posts
553
Reaction score
242
With all of these upgrade to the audio everyone is doing , is the stock charging system Adequate. Meaning no issues
Yes, it is adequate up until about 2500 watts. Then you need to start upgrading power wiring. Alternator is plenty powerful though.
 

A_Train

Full Access Member
Joined
Feb 20, 2014
Posts
201
Reaction score
104
Location
Houston
Hey friends/family - I was curious what the long-term reviews were for replacing the B&O front speakers/tweeters with the pioneer or Morel components sans the amplifier. Thanks in advance!
 

Hush Car Audio

Full Access Member
Joined
May 21, 2020
Posts
264
Reaction score
120
Location
Aubrey, TX
If you do a speaker swap alone you will be impressed. Once you bypass the B&O system and amplify the speakers it will sound like a totally different truck.
 

greatone99

Full Access Member
Joined
Aug 2, 2019
Posts
793
Reaction score
361
Location
ma
the pac audio speaker wire interface , I don't need to connect to the subwoofer wires from the connector correct ? I assume I run wire from my new sub to the output of my a new amp ?
 

Hush Car Audio

Full Access Member
Joined
May 21, 2020
Posts
264
Reaction score
120
Location
Aubrey, TX
the pac audio speaker wire interface , I don't need to connect to the subwoofer wires from the connector correct ? I assume I run wire from my new sub to the output of my a new amp ?

If you have an independent sub and amp you won't need to wire anything back to the Zen if that's what you're asking.
 

greatone99

Full Access Member
Joined
Aug 2, 2019
Posts
793
Reaction score
361
Location
ma
no I meant the pac audio plug ,its an adapter so u don't need to splice into the factory harness for speaker connections
 

dhmcfadin

Full Access Member
Joined
Mar 27, 2018
Posts
553
Reaction score
242
the pac audio speaker wire interface , I don't need to connect to the subwoofer wires from the connector correct ? I assume I run wire from my new sub to the output of my a new amp ?
This is correct. Don’t use the subwoofer wiring in the harness.
 

ljn21

FRF Addict
Joined
Nov 29, 2013
Posts
1,257
Reaction score
2,907
Location
Tega Cay, SC
This is correct. Don’t use the subwoofer wiring in the harness.

Newb question, if you don't use this for adding the aftermarket sub, what do you use it for? Replacing the amp and door speakers fully? Does this adapter eliminate having to run new wires to the front A pillar tweeters to get a clean/unattenuated signal?
 
Top