DIY Oil Change on Raptor R

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

cr23raptor1983

Full Access Member
Joined
Aug 22, 2023
Posts
150
Reaction score
138
Location
Baltimore, Maryland
This thread turned into a nightmare lol this oil change is basic skills- super easy and a good design on the raptor. Once you do it you'll laugh and say how easy it was. Oil will not shoot out and hit the tire either. Just use a big pan to watch it in, drink some coffee, grab some rags and wipe up.... change the filter, add 11.5 quarts and be done. Don't forget to clean up did I mention that?
 

localbrew

FRF Supporting Member
Supporting Member
Joined
Jun 11, 2024
Posts
102
Reaction score
100
Location
Sedona, AZ
Just curious if the dealer actually drains the oil or if they use an evacuator and suck it out through the dipstick?
 

pat247

FRF Addict
Joined
Aug 31, 2011
Posts
2,188
Reaction score
5,682
Location
Oklahoma
I take great pride in my work and that includes oil changes. I try not to rush things so it takes me about two hours to do the oil change. I like to let the oil drain for quite some time so I do it in conjunction with cleaning the interior or some other task. It's important to prep the new oil filter by filling with oil prior to installation and inspecting and lube the gasket to insure it is properly seated. 35 oil changes on my Gen 1 and it's still going strong at 180k.
 

cr23raptor1983

Full Access Member
Joined
Aug 22, 2023
Posts
150
Reaction score
138
Location
Baltimore, Maryland
Lubing the oil filter is oil change basics. The 5w-50 is thin and drains out fast. Of course take your time but this process is nothing to be discussed especially if you are a motor head. Heck I change oil in my cars(except my mclaren that is a little bit of a process) spur of the moment or when I think about it, it's next to washing a vehicle.
 

Hambone

Full Access Member
Joined
Nov 25, 2018
Posts
261
Reaction score
184
Location
Atlanta
I used a flexible spout for the first drain, and then installed a fumoto valve. Super easy and mess free
 

Attachments

  • IMG_0956.png
    IMG_0956.png
    503.2 KB · Views: 3
  • IMG_0954.png
    IMG_0954.png
    414.6 KB · Views: 3
  • IMG_0955.png
    IMG_0955.png
    579.7 KB · Views: 3
Top