Digital Climate Readout on 2024 Causing Auto Start/Stop Issue

[enjoitheride]

Hey, guys. I added the digital HVAC controls to my 2024 Raptor. I had them on my 2023 with no problems. However, this time, it’s killed my auto start stop button. Somehow it’s tied in. Furthermore, there’s error codes in the background that can be seen with the scanner. I don’t remember having those last time.

Does anyone have the proper programming for a 2024, so I can get the Auto start stop button to work again, and not have error codes running in the background?

Thank you!

 

[enjoitheride]

Bump

 

[Donmatteo]

The digital HVAC is the SCCM module which is only climate control. Nothing to do with the ECM.

Did you just do a physical swap or did you save the programming, swap it out and reprogram?

It's possible you missed plugging something back in, unplugged something cut something. Either way, it's user error.

 

[enjoitheride]

The digital HVAC is the SCCM module which is only climate control. Nothing to do with the ECM.

Did you just do a physical swap or did you save the programming, swap it out and reprogram?

It's possible you missed plugging something back in, unplugged something cut something. Either way, it's user error.

The Ford tech at the dealer said they are tied together.

Also, would codes still be in the background?

 

[enjoitheride]

I’m trying to find the original programming that is needed for this mod, to get everything right. I don’t have Forscan. A buddy at the dealer did the programming.

 

[Donmatteo]

The Ford tech at the dealer said they are tied together.

Also, would codes still be in the background?

I would doubt that tech.

The programming is on the SCCM so you would need to reinstall it, pull it, swap it out, and the program the new SCCM

 

[Donmatteo]

I’m trying to find the original programming that is needed for this mod, to get everything right. I don’t have Forscan. A buddy at the dealer did the programming.

You need to pull the new SCCM, put the old one in, Pull the programming, put the new SCCM in, and then program.