Deaver Rust

[EricM]

Wished i would of taken them apart but not that it matters living in New England ill be lucky to even keep this truck from rotting out anyway. 2 winters with plenty of woolwax/waxoyl and still the cab corners and deaver, rear bumper the lips of the rockers all have rust. I also work cleaning cars and wash it often. Doesn’t make an fn difference here. Ive lost the last 2 vehicles cause i couldn’t keep up with the rust. Sorry bit of a sad/angry rant there…lol

You are right- there's nothing you can do if you drive it in the crap.

I keep mine dry. I'm not losing another 4WD truck to the salt.

I surely don't need a 4WD truck to make it through the "snow"- which is usually only a 1/2" of snow with 1/2" of salt spread over it.

 

[BoatzNHoes]

Down in Southern CA and my Gen1 never sees snow/salt etc...Deavers still rust! Shoot, the truck is in the garage when not out in the dry desert. Insane how much these rust. Great product but the rust!

 

[mprice1234]

I totally agree with you about the organic molecules. After 22 years with my ex, SHE HAD ZERO CORROSION on her face and boobs! Science is a great thing.

You left your goat after 22 years? I hope you found it a good home.

 

[2012SCSVT]

I am in the process of the rear leafs being fully prepped and Teflon coated... they just got done with the coating ... I'm pretty stoked hopefully I'll have them tomorrow to report back.



Seems like just last month I installed these for the last time, pulled pre prep:

 

[Gumby]

I am in the process of the rear leafs being fully preped and Teflon coated... they just got done with the coating ... I'm pretty stoked hopefully I'll have them tomorrow to repot back.
View attachment 453935
View attachment 453936

Seems like just last month I installed these for the last time, pulled pre prep:
View attachment 453938

Now that looks good

 

[2012SCSVT]

Now that looks good

Thanks, yeah the guy is doing a legit job, he beveled all the edges and sandblasted the leafs before coating, he ended up machining me new greasable bushings and coated the shackles and sleeves. The sleeves he also re made with a larger wall thickness because he found the deavers bushing sleeves where to thin and they gouged the shackle and front leaf mount.

 

[2012SCSVT]

They have arrived, full "anti friction" serviced.

We pulled one leaf for testing, but have it on hand. Mm

 

[thatJeepguy]

I use pB blaster surface sheild . I shoot it between the leaf stack the best I can and it creeps. No rust yet , AND it acts like a lubricant. Best of both worlds.

 

[Gumby]

They have arrived, full "anti friction" serviced.

We pulled one leaf for testing, but have it on hand. Mm

Your guy put a lot of effort in those. they look really good.